2010 Honda Accord Air Filter in Murray, UT

Engine air filter: {{vehicle.real_engine_filter_price_range_usd}}; Cabin air filter: {{vehicle.real_cabin_filter_price_range_usd}}.

Pricing at Larry H. Miller Honda Murray is up-front and includes OEM-spec filters, proper fitment, and disposal. Your 2.4L inline-4 benefits from a clean engine filter, while a fresh cabin filter improves HVAC airflow and odor control. Book online and check service specials for current offers before you schedule.

• Includes intake housing/MAF visual check with filter service
• OEM-spec Honda filtration for correct seal and airflow
• Visit: 5808 South State Street, Murray, UT 84107

Replace the engine air filter every {{vehicle.oem_engine_filter_interval_miles}} miles.

This interval helps the Accord’s 2.4L inline-4 (190 hp/162 lb-ft) maintain smooth intake airflow and fuel economy. If you frequently drive Utah canyon roads, dusty worksites, or winter-treated routes along the Wasatch Front, consider earlier checks. We can inspect the filter condition during your visit and advise the right timing.

• Interval based on Honda’s OEM guidance
• Dusty or high-pollen routes may shorten the service life
• Schedule engine filter service in Murray

Replace the cabin air filter every {{vehicle.oem_cabin_filter_interval_miles}} miles.

The cabin filter keeps HVAC airflow strong and reduces dust and odors inside your Accord Coupe. Utah’s seasonal pollen and inversion periods can load the media sooner, so a periodic inspection is smart if you notice weaker airflow. We’ll review the element and recommend replacement if it’s saturated.

• Helps maintain clear defrost and consistent A/C output
• Captures dust and debris from local road and weather conditions
• Book cabin filter service at Larry H. Miller Honda Murray

It sits under the hood in the intake air box on the driver side.

The rectangular element is housed in a plastic box fed by the intake snorkel; releasing the clips/screws exposes the filter. Ensuring the lid seals evenly prevents unfiltered air from bypassing the 2.4L inline-4’s intake. If in doubt, we can verify fitment and inspect the ducting for cracks.

• Check the air box gasket and clips for proper engagement
• Inspect the intake duct for wear or loose clamps
• Schedule at 5808 S State St, Murray, UT 84107

The engine filter protects the 2.4L inline-4’s intake, while the cabin filter cleans HVAC air for passengers.

Engine filters keep dirt from entering the throttle body and MAF, supporting power and fuel economy. Cabin filters trap dust and debris before air reaches vents, improving comfort and odor control. Both are service items and use different media and locations.

• Engine filter: under-hood intake box; cabin filter: typically behind the glove box
• Each serves different systems—combustion vs. passenger comfort
• See service specials for both filters

Engine: reduced power/mpg or rough idle; Cabin: weak HVAC airflow or musty odors.

When the engine filter is restricted, the Accord’s inline-4 may feel sluggish and less efficient. A saturated cabin filter limits vent output and can cause stale smells. If you’re driving in dusty Murray/Salt Lake routes, these symptoms often appear sooner. We can test-fit a new filter and confirm improvements.

• Check for uneven or darkened filter media
• Listen for whistling from a mis-seated air box lid
• Book a diagnostic visit at LHM Honda

Yes—the engine filter is DIY-friendly; the cabin filter often sits behind the glove box and may require trim removal.

Many owners handle the engine filter at home with basic tools, but the cabin filter’s access can be tighter. Our team adds an intake/MAF visual check and confirms OEM-spec fitment to prevent noise or bypass. If you prefer expert installation with correct sealing, we’re ready to help.

• Use Honda-spec filters to ensure proper seal and flow
• Dealer install adds intake duct and MAF inspection
• Schedule service at Larry H. Miller Honda Murray

Yes—our technicians install Honda Genuine engine and cabin air filters that meet OEM specifications.

OEM filters provide exact dimensions, correct gasket compression, and media engineered for the Accord’s intake and HVAC systems. This helps preserve performance, airflow, and noise control. Parts are backed by our stated terms so you know what’s covered.

• Correct fitment helps prevent unmetered air and rattles
• Parts warranty: {{rooftop.warranty_terms.parts}}
• Check service specials before you schedule

Our air filter service follows a clear, OEM-focused process designed for the 2010 Honda Accord’s 2.4L inline-4 and its cabin HVAC system. First, we perform an intake air box and duct visual check, then remove and inspect the engine air filter for dirt loading, tears, and sealing surfaces. If due, we replace it with a Honda Genuine element and ensure the air box lid clamps evenly. Next, we access and inspect the cabin air filter, confirm airflow direction, and install an OEM-spec filter if replacement is required. We finish with a MAF and snorkel visual check and verify smooth idle and proper vent output. Parts are covered per {{rooftop.warranty_terms.parts}}. Ready to proceed? Schedule service or call {{rooftop.phone}}.

We serve the greater Salt Lake City area from our Murray location—convenient to Millcreek, Taylorsville, Sandy, and Holladay. Local driving conditions, including {{rooftop.climate_context}}, can load both engine and cabin filters faster, especially during construction, mountain-pass travel, and spring pollen spikes. With {{rooftop.years_in_operation}} years in the community and {{rooftop.certified_tech_count}} certified technicians, we deliver consistent, OEM-spec results for your 2010 Honda Accord. Visit us at 5808 South State Street, Murray, UT 84107 for a quick inspection, review current service specials, and schedule your appointment online. Directions and same-location pickup/drop-off keep service simple.

The 2010 Honda Accord Coupe uses an engine air filter in the under-hood intake box to protect its 2.4L inline-4 (engine code 4INAG2.4; 190 hp at 7,000 rpm and 162 lb-ft at 4,400 rpm). The cabin air filter sits in the HVAC path (typically behind the glove box) to clean incoming air before it reaches vents. Follow Honda’s recommended intervals—engine: {{vehicle.oem_engine_filter_interval_miles}} miles; cabin: {{vehicle.oem_cabin_filter_interval_miles}} miles—and use Honda Genuine filters for proper seal and flow. If you drive in dust, road-treatment residue, or high-pollen seasons, ask for more frequent inspections. Bring your 2010 Honda Accord to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.