2010 Honda Civic Air Filter in Murray, UT

The 2010 Honda Civic engine air filter sits in the engine bay inside a rectangular airbox connected to the intake tube.

You’ll find the airbox secured with clips or screws; opening the lid exposes the panel-style filter for quick inspection. This location allows fast service without disturbing other components and helps protect the 1.8L inline-4 intake from debris. If you prefer professional service, our Honda-certified team in Murray will inspect the housing and seals during replacement.

• Located in a rectangular airbox in the engine bay
• Accessed by releasing clips or screws on the airbox lid
• Connected to the intake tube feeding the 1.8L inline-4

The 2010 Honda Civic cabin air filter is positioned behind the glove box within the HVAC intake path.

Lower the glove box and release its side stops to access the rectangular cabin filter tray. This placement captures dust, pollen, and road particulates before air reaches the vents. Our technicians can replace the filter and check the blower intake for leaves and debris that often collect in this area over time.

• Located behind the glove box in the HVAC intake
• Access via glove box stop releases and a slide-out tray
• Filters cabin air to improve ventilation quality

The engine air filter protects the 1.8L inline-4’s intake air, while the cabin air filter cleans the air entering the HVAC and passenger area.

The engine filter helps maintain proper airflow for combustion, supporting power and fuel economy. The cabin filter traps dust and allergens to keep interior air fresher for occupants. Both are serviceable items and benefit from periodic inspections, especially in dusty or high-traffic driving around Murray.

• Engine filter: intake air for combustion
• Cabin filter: interior HVAC air for occupants
• Both are replaceable maintenance components

Four common signs are reduced power, lower fuel economy, rough idle (engine filter), and weak airflow or musty odors (cabin filter).

A dirty engine filter restricts intake flow, which can dull throttle response and raise fuel consumption. Inside the cabin, a saturated filter can strain the blower motor and allow odors to linger. If you notice these symptoms on a 2010 Honda Civic, schedule a quick check in Murray for a same-day inspection and OEM-spec replacement.

• Sluggish acceleration and decreased MPG
• Rough idle or uneven engine response
• Weak vent airflow or persistent musty smell

Yes—engine filters are typically DIY-friendly; the cabin filter sits behind the glove box and may require trim releases and careful orientation.

Many owners can swap the engine filter by opening the airbox and dropping in a new element. The cabin filter is also accessible but benefits from attention to airflow direction and proper sealing. Dealer service at Larry H. Miller Honda Murray adds housing inspection, a visual MAF check, and installation of OEM-spec filters.

• DIY possible with basic tools and care
• Cabin filter requires glove box access and correct airflow arrow
• Dealer adds intake/MAF checks and OEM-spec parts

Yes—Larry H. Miller Honda Murray installs Honda Genuine OEM filters that meet factory specifications.

OEM filtration ensures correct fit, seal integrity, and media performance for the 2010 Honda Civic’s 1.8L intake and HVAC system. Genuine parts also help preserve safety, drivability, and potential resale value. Ask our team to show you the part numbers and packaging during your visit for complete transparency.

• Honda Genuine engine and cabin filters
• Built to factory dimensions and performance specs
• Supports long-term reliability and value

Book online via the Larry H. Miller Honda Online Scheduling Tool or call (801) 719-5451; hours are Mon–Fri 7:00 AM–6:00 PM and Sat 8:00 AM–5:00 PM.

Our scheduling portal lets you choose a time and note any concerns for your 2010 Honda Civic. You can also explore current service specials before booking. For convenience, use the schedule service link to confirm your visit in minutes.

• Online scheduling with instant confirmation
• Phone support at (801) 719-5451
• Weekend availability on Saturdays

We check the filter element, housing seals, intake ducting, and perform a visual MAF sensor inspection during service.

For a 2010 Honda Civic, technicians verify that the airbox closes evenly and that duct clamps are snug to prevent unmetered air leaks. Cabin filter service includes confirming correct airflow direction and seating. These steps help maintain proper engine management and clean, quiet HVAC operation.

• Engine airbox and duct integrity check
• MAF sensor visual and connector inspection
• Cabin filter fitment and airflow-direction verification

Visit Larry H. Miller Honda Murray at 5808 South State Street, Murray, Utah, for 2010 Honda Civic air filter service.

Our facility services both engine and cabin filters with Honda Genuine parts. Enjoy a comfortable lounge with Wi‑Fi and complimentary refreshments while we work. Use schedule service to reserve a time or call (801) 719-5451 for assistance.

• Convenient Murray location on South State Street
• Honda-certified technicians for precise fit and performance
• Easy online scheduling and same-day availability

For the 2010 Honda Civic, our process is thorough and efficient. We begin with an engine air filter inspection, checking the element for contamination and the airbox for proper sealing and clip integrity. If replacement is needed, we install a Honda Genuine filter, verify the airbox fit, and visually inspect the mass air flow (MAF) sensor and intake ducting for leaks or damage. Next, we access the cabin air filter behind the glove box, examine the media, confirm airflow orientation, and replace it with an OEM-spec element when required. To finish, we clear any debris from the cowl/blower intake area and confirm steady HVAC airflow. Ready to book? Use our schedule service tool or call (801) 719-5451. Don’t forget to check current service specials before your visit.

The 2010 Honda Civic pairs a 1.8L inline-4 engine with a panel-style engine air filter designed to maintain consistent intake airflow and seal integrity. Its cabin air filter uses a rectangular cartridge located behind the glove box to capture dust and pollen before air reaches the HVAC system. Follow the Honda maintenance schedule and adjust inspection frequency based on your driving environment and mileage. Using Honda Genuine filters helps ensure correct fitment, filtration efficiency, and durable pleat construction for the Civic’s airbox and HVAC tray. If you notice weakened cabin airflow or a visibly dark engine filter, it’s time to inspect and replace. Bring your 2010 Honda Civic to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.

Driving in Murray can expose your 2010 Honda Civic to urban dust, road debris, and seasonal pollen, all of which load filters faster than expected. Our Honda-certified team performs targeted inspections to catch early signs of restriction and installs OEM-spec filters for reliable performance. Expect straightforward communication, quick turnaround options, and amenities that keep your day moving while we work. You can plan ahead online and coordinate around weekday or Saturday availability.

We’re easy to find at 5808 South State Street in Murray, Utah. Use our schedule service tool to pick a time, review service specials before you arrive, or call (801) 719-5451 for assistance and directions.