2010 Honda Cr-V Oil Change in Murray, UT

Larry H. Miller Honda Murray provides up-front pricing online for the 2010 Honda CR-V oil change, with cost varying by oil type and filter.

Because the CR-V’s 2.4L inline-4 can be serviced with different oil formulations, your final price depends on the oil type you select and any applicable service specials. You’ll see your total before you book, and disposal and shop supplies are included. Schedule a visit and we’ll confirm your options during check-in.

• OEM-spec oil and a genuine Honda filter included
• Multi-point inspection and fluid top-offs included
• Transparent estimate before any work begins

Most 2010 Honda CR-V oil changes are completed the same day at Larry H. Miller Honda Murray.

Turnaround depends on appointment time and inspection results, but routine CR-V oil service is typically wrapped up quickly by our OEM-trained team. Book ahead to minimize wait time, and we’ll text you when your CR-V is ready for pickup at 5808 South State Street in Murray.

• Same-day service for most appointments
• Factory-certified technicians on Honda vehicles
• Reserve your spot: schedule service

Follow the interval in your owner’s manual for the 2010 Honda CR-V and service according to Honda’s OEM schedule.

Driving in Utah can involve cold starts, dust, elevation changes, and stop‑and‑go traffic along the Wasatch Front. Those conditions may call for more frequent service than purely highway use. We’ll review your mileage and patterns to set an appropriate plan and document it for your records.

• Maintenance tailored to local conditions
• Service history recorded for warranty and resale
• Easy booking: schedule appointment

We install Honda OEM‑spec oil in the correct viscosity for the 2010 Honda CR‑V, as specified on the oil cap and in the owner’s manual.

Our advisors will confirm the proper viscosity for your VIN at check‑in and note it on your repair order. Whether you choose full synthetic or a blend, the oil we use meets Honda’s performance requirements for the CR‑V’s 2.4‑liter inline‑4.

• Correct viscosity verified against Honda documentation
• Genuine Honda oil filter installed
• Used oil and filter recycled responsibly

Yes—dealer service includes OEM‑spec oil, a Honda filter, and a documented multi‑point inspection at Larry H. Miller Honda Murray.

Quick‑lube shops can be convenient, but our Honda-focused team uses parts and procedures approved by the manufacturer and records service to help preserve vehicle value. You’ll also get clear recommendations based on the CR‑V’s age, mileage, and local driving.

• OEM‑trained technicians with Honda-specific tools
• Service records kept for future resale or warranty
• Check current offers: service specials

Skipping oil changes can jeopardize warranty coverage if still applicable because Honda requires maintenance per the OEM schedule.

Always keep receipts and service records to show timely oil changes. Warranty work generally requires diagnosis and repair at a certified facility; we’ll review your documentation and advise next steps if a claim is needed.

• Follow the Honda schedule in the owner’s manual
• Maintain records of parts and labor
• Get compliant service: schedule service

Full synthetic offers the highest resistance to heat and oxidation; blends and conventional provide progressively less protection.

In Utah’s climate, synthetic oil’s cold‑start flow and high‑temperature stability can be beneficial, especially with mountain driving and stop‑and‑go use. We’ll match oil type to your driving and note the exact spec on your invoice.

• Better cold‑weather pumpability with synthetics
• Improved protection under heavy loads and heat
• Advisor guidance based on your commute and towing

The exact capacity is listed in the owner’s manual; our technicians fill the 2.4‑liter inline‑4 to factory spec and verify by dipstick.

We use the correct amount of OEM‑spec oil for the CR‑V’s engine and confirm level after running the engine and allowing proper drain‑back. Your repair order will document the quantity used and the filter installed for future reference.

• Fill quantity set to Honda specification
• Level confirmed warm and rechecked after road test
• Details recorded on your final invoice

Every 2010 Honda CR-V oil change at Larry H. Miller Honda Murray follows Honda procedures and uses OEM-spec resources. After verifying your VIN and oil spec, we drain the engine oil, replace the crush washer, and install a genuine Honda oil filter. We then fill the engine with the correct viscosity oil that meets Honda performance standards, start the engine, and verify level by dipstick after drain-back. A multi-point inspection checks brakes, tires, steering and suspension items that can be visually confirmed, plus under-hood fluids. We top off fluids as needed, reset the maintenance indicator if applicable, and note findings on your inspection report. Our work is documented on your repair order so you have a clear record for future maintenance or resale. Ready to book? Use our online tool to schedule service today.

The 2010 Honda CR-V uses a 2.4-liter inline-4 engine designed to run on Honda-approved engine oil and a genuine Honda oil filter. We confirm the correct viscosity and type for your specific VIN at write-up and record the exact fill on your invoice. Because driving in the Wasatch Front can involve cold starts, dust, and elevation changes, we can help you decide whether a synthetic blend or full synthetic is the better fit for your routine. If Honda has issued any guidance updates for oil or filters on your CR-V, our advisors will apply the latest information at service time. Bring your 2010 Honda CR-V to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

Our dealership serves drivers across the greater Salt Lake City area—Millcreek, Taylorsville, Sandy, and Holladay—who rely on the 2010 Honda CR-V for commuting and weekend trips into the mountains. Utah’s climate and terrain can stress engine oil with frequent cold starts, dusty conditions, and stop-and-go city traffic. We account for those factors during inspection and tailor recommendations to your usage. You’ll get clear options, genuine Honda parts, and work performed by OEM-trained technicians in a factory-authorized facility at 5808 South State Street, Murray, UT 84107. Check current service specials, then schedule service for your next 2010 Honda CR-V oil change. Need directions or have questions? Our team is ready to help when you arrive.