Larry H. Miller Honda Murray

2010 Honda Element Oil Change

Honda Oil Change service at Larry H. Miller Honda Murray in Murray, UT

Frequently asked questions

Frequently Asked Questions

11 common questions answered

How much horsepower does the 2010 Honda Element have?The 2010 Honda Element produces 166 horsepower at 5,800 rpm.

Its 2.4-liter inline-four engine also generates 161 lb-ft of torque at 4,000 rpm. This output supports everyday commuting, cargo hauling, and practical SUV driving in Murray and surrounding Utah communities.

  • 2,354 cc engine displacement
  • Inline-four engine layout
  • Five-speed automatic transmission
What gas mileage does the 2010 Honda Element get?The 2010 Honda Element is rated at 20 MPG city and 25 MPG highway.

The Element uses regular unleaded fuel and has a 15.9-gallon fuel capacity. Actual mileage can vary with driving conditions, traffic, vehicle load, and maintenance habits, making routine service important for dependable daily use.

  • 20 city MPG
  • 25 highway MPG
  • 15.9-gallon fuel capacity
How much can a 2010 Honda Element tow?The 2010 Honda Element has a maximum towing capacity of 1,500 pounds.

That capacity can support appropriately equipped recreational or utility loads when towing is completed within vehicle and equipment guidelines. Larry H. Miller Honda Murray can help keep the engine, fluids, brakes, and tires ready for regular driving duties.

  • Maximum towing capacity: 1,500 pounds
  • 161 lb-ft of peak torque
  • Available front-wheel drive or all-wheel drive
How much cargo space does the 2010 Honda Element have?The 2010 Honda Element has 25.1 cubic feet of cargo space behind the rear seats.

Its SUV body style is designed for useful everyday storage, whether you are carrying groceries, outdoor equipment, or work supplies. Routine oil service helps protect the engine that supports this practical versatility.

  • 25.1 cubic feet behind the rear seats
  • SUV body style
  • Regular unleaded fuel
What engine is in the 2010 Honda Element?The 2010 Honda Element uses a 2.4-liter inline-four engine with 2,354 cc of displacement.

The engine is paired with a five-speed automatic transmission and produces 166 horsepower. An oil change replaces the engine oil and filter, resets the oil-life monitor, and includes a check of underhood fluid levels.

  • 2.4-liter engine
  • 2,354 cc displacement
  • Five-speed automatic transmission
Is the 2010 Honda Element front-wheel drive or all-wheel drive?The 2010 Honda Element was offered with front-wheel drive or all-wheel drive, depending on configuration.

Both drivetrain choices use the same 2.4-liter inline-four engine specification across the model range. For drivers in Murray, drivetrain service and regular oil maintenance help support dependable transportation through changing road conditions.

  • Front-wheel-drive availability
  • All-wheel-drive availability
  • 166 horsepower
What does an oil change for a 2010 Honda Element include?An oil change for a 2010 Honda Element includes fresh manufacturer-specified oil, a new oil filter, an oil-life monitor reset, and underhood fluid checks.

The service removes used oil and replaces it with the grade specified for the engine. Larry H. Miller Honda Murray performs this maintenance at 5808 S. State Street in Murray, Utah, helping keep the service visit documented in the vehicle history.

  • Drain and refill with manufacturer-specified oil
  • New oil filter
  • Oil-life monitor reset and fluid-level check
Where can I get a 2010 Honda Element oil change in Murray, Utah?Larry H. Miller Honda Murray provides 2010 Honda Element oil changes at 5808 S. State Street in Murray, Utah.

The service team handles oil and filter replacement along with an oil-life monitor reset and underhood fluid check. Use the service appointment scheduler or contact the dealership at 385-425-4756.

  • Convenient Murray, Utah location
  • Manufacturer-specified oil service
  • Online appointment scheduling
2010 Honda Element Oil SpecificationsThe 2010 Honda Element uses a 2.4-liter inline-four engine with 2,354 cc of displacement. Its engine produces 166 horsepower at 5,800 rpm and 161 lb-ft of torque at 4,000 rpm. During an oil change, the used oil is drained and replaced with the grade specified by the manufacturer, followed by installation of a new oil filter. The oil-life monitor is reset, and underhood fluid levels are checked before the vehicle leaves the service area.

Oil loses its ability to carry heat and debris as it ages, even when it does not appear heavily soiled. Drivers may notice an oil-change reminder, a low or dark dipstick reading, or a ticking or louder engine note at startup. The vehicle's maintenance schedule does not establish an interval in the available service information, so drivers should use the vehicle's oil-life monitoring guidance and address service reminders promptly.

Bring your 2010 Honda Element to Larry H. Miller Honda Murray in Murray for an oil service using the engine's manufacturer-specified oil and filter. Schedule service online or call 385-425-4756.

2010 Honda Element Oil Change Service in MurrayLarry H. Miller Honda Murray serves drivers from Murray and nearby Utah communities at 5808 S. State Street. The service team supports both new and pre-owned vehicles with routine maintenance and diagnostics, including oil changes, tire rotations, brake service, transmission service, and multi-point inspections. For the 2010 Honda Element, an oil visit focuses on replacing the engine oil and filter, resetting the oil-life monitor, and checking underhood fluid levels.

Local driving can involve stop-and-go traffic, changing temperatures, and regular vehicle loads. Those conditions can increase the importance of keeping engine oil fresh and monitoring service reminders. The dealership service center offers online scheduling, same-day service availability, a local shuttle, and a remodeled waiting area with Wi-Fi, charging stations, television, and complimentary food and beverages.

Service hours are Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM; the service center is closed Sunday. Schedule service at Larry H. Miller Honda Murray or call 385-425-4756 for assistance.

What's Included in a 2010 Honda Element Oil ChangeAn oil change begins with draining the used engine oil and replacing it with the manufacturer-specified oil grade. The technician installs a new oil filter, which helps remove contaminants from the circulating oil. After the refill, the oil-life monitor is reset so the vehicle can accurately track its next maintenance reminder. The visit also includes a check of underhood fluid levels.

Fresh oil helps carry engine heat and debris during normal operation. Service is especially useful when the oil-change reminder illuminates, the dipstick looks dark or low, or the engine sounds louder or ticks during startup. Booking the service gets the oil and filter replaced and the visit logged against the vehicle's history.

For help with your 2010 Honda Element, schedule service online at Larry H. Miller Honda Murray in Murray, Utah, or call 385-425-4756.