Larry H. Miller Honda Murray
2010 Honda Insight Oil Change
Honda Oil Change service at Larry H. Miller Honda Murray in Murray, UT
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
11 common questions answered
What does an oil change include for a 2010 Honda Insight?An oil change for a 2010 Honda Insight includes oil replacement, a new oil filter, an oil-life monitor reset, and underhood fluid checks.
The technician drains the used engine oil and refills the engine with the grade specified for the vehicle. The visit also includes installation of a new oil filter and a check of underhood fluid levels. Booking the service provides a recorded maintenance visit for the vehicle’s history.
- Drain and refill with manufacturer-specified oil
- Install a new oil filter
- Reset the oil-life monitor and check fluid levels
Where can I get a 2010 Honda Insight oil change in Murray, UT?Larry H. Miller Honda Murray services the 2010 Honda Insight at 5808 South State Street in Murray, Utah.
The service team works on both new and pre-owned vehicles and offers routine maintenance and complex diagnostics. Customers can use the online schedule service tool or contact the service department directly. The facility is open Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM.
- Factory-trained Honda technicians
- Genuine Honda parts
- Online scheduling and a complimentary local shuttle
Why does a 2010 Honda Insight need regular oil changes?Engine oil loses its additive package and its ability to carry heat and debris before it necessarily looks dirty.
Fresh oil helps support engine lubrication and heat management during normal driving. Oil that appears dark or low on the dipstick, a reminder light, or a ticking or louder engine note at startup can indicate that service should be considered. Larry H. Miller Honda Murray replaces the oil and filter with the grade the engine specifies.
- Oil appearance alone does not determine condition
- Low oil on the dipstick warrants attention
- The completed visit is logged against the vehicle’s history
What engine does the 2010 Honda Insight have?The 2010 Honda Insight uses a 1.3-liter, 1,339 cc inline-four engine rated at 98 horsepower and 123 lb-ft of torque.
Peak power is reached at 5,800 rpm, while peak torque is reached at 1,000 rpm. The hatchback uses front-wheel drive and an automatic continuously variable transmission. Regular unleaded fuel is specified for this Honda Insight.
- 1.3-liter inline-four engine
- 98 horsepower and 123 lb-ft of torque
- Front-wheel drive with a continuously variable transmission
Is the 2010 Honda Insight a hatchback?Yes, the 2010 Honda Insight is a hatchback with front-wheel drive and an automatic continuously variable transmission.
Its 1.3-liter inline-four engine produces 98 horsepower and 123 lb-ft of torque. The powertrain uses regular unleaded fuel and reaches peak torque at 1,000 rpm. These specifications apply across the two trims of this model.
- Hatchback body style
- Front-wheel-drive layout
- Automatic continuously variable transmission
How do I schedule service for my 2010 Honda Insight?You can schedule a 2010 Honda Insight service appointment online through Larry H. Miller Honda Murray or call (801) 719-5451.
The online appointment form is available for oil changes, maintenance, and other automotive service needs. The Murray service center offers same-day service availability and a complimentary local shuttle. Its modern waiting area includes Wi-Fi, device charging stations, television, and complimentary food and beverages.
- Schedule service online
- Call the service department at (801) 719-5451
- Visit 5808 South State Street, Murray, UT 84107
Who services a 2010 Honda Insight at Larry H. Miller Honda Murray?Factory-trained Honda technicians service the 2010 Honda Insight at Larry H. Miller Honda Murray.
The team uses state-of-the-art tools and diagnostic equipment for routine maintenance and complex diagnostics. Genuine Honda parts are used for service and repairs. A complimentary multi-point inspection can help identify maintenance needs during a visit.
- Factory-trained Honda technicians
- State-of-the-art diagnostic equipment
- Genuine Honda parts and multi-point inspections
What are signs that my 2010 Honda Insight may need an oil change?An oil-change reminder light, dark or low oil on the dipstick, or a ticking or louder startup engine note can signal service attention.
Engine oil can lose its ability to carry heat and debris even before it looks dirty. A technician can drain the used oil, install a new filter, refill the engine with the specified grade, and reset the oil-life monitor. The service also includes an underhood fluid-level check.
- Oil-change reminder light
- Dark or low oil on the dipstick
- Ticking or louder engine sound at startup
2010 Honda Insight Oil Change Service in MurrayLarry H. Miller Honda Murray provides oil-change service for the 2010 Honda Insight at 5808 South State Street in Murray, Utah. The service team supports both new and pre-owned vehicles, from routine maintenance to complex diagnostics. The dealership’s service center is open Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM, with Sunday closed.
Keeping engine oil fresh matters because oil gradually loses its additive package and its ability to carry heat and debris. Murray drivers can also use the complimentary local shuttle while their vehicle is being serviced. The remodeled waiting area includes free Wi-Fi, soft chairs, device charging stations, television, and complimentary food and beverages.
Use the online service scheduler to request an appointment, or call the service department at (801) 719-5451. Service specials are available through the service specials page.
What’s Included in a 2010 Honda Insight Oil ChangeAn oil change begins with draining the used engine oil from the 2010 Honda Insight. The technician then refills the engine with the oil grade and capacity the manufacturer specifies and installs a new oil filter. This process supports clean lubrication and helps the engine manage heat and debris during operation.
The visit also includes resetting the oil-life monitor and checking underhood fluid levels. A complimentary multi-point inspection can help identify visible maintenance needs, while the service team can address tire rotations, brake pad replacement, transmission service, and other automotive care needs. Booking the visit provides an oil and filter replacement with the specified grade and logs the service against the vehicle’s history.
For appointment help, use the schedule service form or call 385-425-4756. Visit Larry H. Miller Honda Murray at 5808 South State Street, Murray, UT 84107.
2010 Honda Insight Oil SpecificationsThe 2010 Honda Insight uses a 1.3-liter, 1,339 cc inline-four engine with 98 horsepower and 123 lb-ft of torque. Its powertrain pairs front-wheel drive with an automatic continuously variable transmission and uses regular unleaded fuel. For oil service, the technician drains the existing oil and refills the engine with the grade and capacity specified for the vehicle.
The oil-change service includes a new filter, an oil-life monitor reset, and an underhood fluid-level check. Engine oil can lose heat-carrying and debris-carrying ability before it looks dirty, so a visual appearance check alone does not establish oil condition. An oil-change reminder light, low or dark dipstick oil, or a louder ticking startup sound can indicate that service attention is appropriate.
Bring your 2010 Honda Insight to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.