2011 Honda Cr-V Air Filter in Murray, UT

Engine air filter replacement typically runs $45–$95, and cabin air filter replacement runs $69–$139 at Larry H. Miller Honda Murray (before tax/fees).

We use Genuine Honda or OEM-spec filters tailored to the 2011 Honda CR-V’s 2.4L inline-4 and HVAC system. Your visit includes proper housing reseal and a visual intake/MAF check. You’ll get an upfront, itemized estimate, and you can check our current service specials for potential savings.

• Price varies by filter type (engine vs. cabin) and parts selection (OEM).
• Includes installation, housing inspection, and old filter recycling.
• Schedule online: schedule service.

Plan on about every 30,000 miles in normal driving, or 15,000–20,000 miles if you encounter dust, construction zones, or frequent canyon driving along the Wasatch Front.

The 2011 Honda CR-V’s 2.4L (2354 cc) inline-4 relies on clean intake air to maintain power and mpg. Shorter intervals help if you often travel unpaved roads or through seasonal pollen. We can inspect the filter at each oil change and advise based on local conditions in Murray and greater Salt Lake City.

• Visual checks at each oil change catch early clogging.
• Severe use (dust, smoke, high winds) accelerates filter loading.
• Book an inspection: schedule service.

Replace the cabin air filter about every 15,000–20,000 miles or roughly once a year, sooner if you notice odors or reduced HVAC airflow.

This filter scrubs pollen, dust, and debris before it reaches you and your passengers. Along the Wasatch Front, spring pollen and roadside dust can shorten life. We’ll check your 2011 Honda CR-V’s cabin filter during routine maintenance and recommend the right timing for your driving pattern.

• Annual replacement helps maintain heater/AC performance.
• Pet dander and wildfire smoke can speed clogging.
• See offers: service specials.

It sits inside a rectangular airbox in the engine bay, secured by clips; the cabin filter is typically behind the glove box.

On the 2011 Honda CR-V, the airbox routes fresh air to the 2.4L inline-4’s intake; releasing the clips and lifting the lid exposes the panel-style engine filter. The cabin filter slides into a tray behind the glove box once the stop tabs are released. Our team in Murray can replace both quickly and correctly.

• Engine filter: rectangular panel inside air cleaner housing.
• Cabin filter: access panel behind glove box.
• We reseal housings to prevent unmetered air leaks.

The engine filter cleans air for the 2.4L inline-4s combustion, while the cabin filter cleans air entering the HVAC system for passengers.

Both are vital but do different jobs on the 2011 Honda CR-V. The engine filter protects the MAF sensor and intake from dust, helping preserve power and mpg. The cabin filter reduces pollen, dust, and odors in the interior. We stock OEM-spec filters designed for proper airflow and fit.

• Engine: protects intake, sensors, and combustion.
• Cabin: improves in-cabin air quality and HVAC performance.
• OEM fit ensures seal integrity and correct flow.

Five common signs are reduced power, lower fuel economy, rough or hunting idle, weak HVAC airflow, and a musty odor from vents.

On a 2011 Honda CR-V, a dirty engine filter can dull throttle response and hurt mpg, while a clogged cabin filter makes the blower work harder and can carry odors. Utah dust and seasonal pollen can accelerate clogging. Well inspect both filters and confirm whether replacement is due.

• Engine: sluggish acceleration, frequent airbox debris.
• Cabin: noisy fan, foggy windows clearing slowly.
• Quick inspections available during oil service.

Yes—engine filters are typically DIY-friendly with simple clips, while cabin filters often require glove box removal and careful tray reassembly.

Many owners can swap the engine filter on a 2011 Honda CR-V at home. The cabin filter involves releasing glove box stops and inserting the media the correct airflow direction. At Larry H. Miller Honda Murray, we also inspect the intake ducting and MAF area and confirm the housing seal to avoid unmetered air.

• DIY engine filter: basic hand tools or no tools.
• Dealer service adds intake/MAF inspection and correct sealing.
• Prefer expert help? Schedule an appointment.

Yes—our team installs Genuine Honda or OEM-spec engine and cabin air filters matched to the 2011 Honda CR-V.

As a factory-authorized Honda dealership in Murray, we stock parts engineered for the CR-Vs 2.4L intake system and HVAC housing. Proper fit and media density help maintain performance, mpg, and blower efficiency. Ask us to show you the part number we install on your vehicle.

• OEM-spec fit prevents air bypass and rattles.
• Correct media supports sensor health and airflow.
• Questions? Visit us or schedule service.

Plan about 30–45 minutes for both engine and cabin air filter replacement when scheduled as a stand-alone service.

Time varies slightly based on shop volume and whether were pairing the job with an oil change or multi-point inspection. Your advisor will provide an accurate timeframe at check-in. To minimize wait time, book an appointment online and check in at our Murray location.

• Add-on services may extend total visit time.
• We offer online booking and status updates.
• Reserve your slot: schedule service.

Our process balances speed with precision for your 2011 Honda CR-V. We begin with a visual inspection of the engine air filter housing, intake ducting, and MAF area for debris or seal issues. The technician removes the engine filter, checks the airbox for dust or leaves, and installs a Genuine Honda or OEM-spec panel filter with correct orientation. Next, we access the cabin filter behind the glove box, slide out the old media, inspect the tray and evaporator face for excessive debris, and install the new filter with the airflow arrow aligned. We reseat all clips and stops, confirm HVAC operation, document findings, and reset applicable service reminders. Ready to go? Use our online portal to schedule service today.

We serve drivers from Murray, Millcreek, Taylorsville, Sandy, Holladay, and the greater Salt Lake City area with air filter maintenance tailored to local driving. Stop-and-go commutes, seasonal pollen, and occasional dusty roadwork can accelerate filter loading in a 2011 Honda CR-V. Our factory-authorized team inspects your filters at regular visits and recommends replacement based on condition, not guesswork. Visit our state-of-the-art facility at 5808 South State Street, Murray, UT 84107, or plan ahead online. Need to time your visit around other errands? Book a slot and well have your Genuine Honda parts ready. For current offers, check our service specials, and when youre ready, schedule service.

The 2011 Honda CR-V uses a panel-style engine air filter matched to its 2.4L inline-4 (2354 cc) intake and MAF calibration, plus a rectangular cabin air filter sized for the HVAC case behind the glove box. Under normal conditions, aim for engine filter service about every 30,000 miles and cabin filter service every 15,000–20,000 miles or roughly annually; replace sooner in dusty or high-pollen conditions. We source Genuine Honda or OEM-spec media that preserves airflow and sealing integrity, preventing unmetered air and bypass. If you notice reduced power, rough idle, weak HVAC airflow, or odors, have both filters checked. Bring your 2011 Honda CR-V to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.