2013 Honda Cr-V Air Filter in Murray, UT

The 2013 Honda CR-V engine air filter sits inside the under-hood airbox near the driver-side front corner.

This panel-style filter feeds the 2.4L inline-4 and is secured by clips or screws on the airbox lid. If you commute across mountain passes or through construction zones, inspecting the airbox for debris during oil changes is wise. Our Murray service team can confirm proper fitment and sealing to protect your mass airflow sensor—just schedule service.

• Release the airbox clips/fasteners and lift the lid carefully.
• Note filter orientation and the air-flow arrow before removal.
• Check the snorkel and seals for leaves, dust, and gaps.

The 2013 Honda CR-V cabin air filter is located directly behind the glove box in the HVAC case.

Lower the glove box, release its side damper, and squeeze the stops to access the rectangular filter tray. This filter cleans incoming air for you and your passengers—especially helpful during local pollen surges or dusty commutes. If you prefer a professional replacement with a housing check, schedule service at Larry H. Miller Honda Murray.

• Open glove box and unhook the small side damper.
• Squeeze both sides of the glove box to clear the stops.
• Slide out the tray, replace the filter, and re-seat the tray fully.

The engine air filter protects the 2.4L inline‑4’s intake, while the cabin air filter cleans air entering the HVAC system for passengers.

The engine filter lives in the under-hood airbox and helps maintain smooth power and stable fuel trims. The cabin filter sits behind the glove box and captures dust, pollen, and road particles so the interior air stays fresher. We install Honda Genuine filters for correct fit and filtration—check our service specials before you book.

• Engine filter: performance and fuel economy protection.
• Cabin filter: HVAC airflow quality and odor reduction.
• Different locations, media, and replacement steps.

Typical signs include reduced power, lower fuel economy, rough idle (engine filter) and weak airflow or musty odors (cabin filter).

In Utah’s mix of canyon drives and city traffic, dust and pollen can load filters faster. If your CR-V feels sluggish or the vents blow weakly with an earthy smell, it’s time to inspect both filters. Our technicians can test-fit an OEM filter and verify the intake seals—schedule an appointment for a quick evaluation.

• Noticeable drop in acceleration or MPG.
• HVAC fan works, but airflow is reduced.
• Persistent cabin odor after starting climate control.

Yes—many owners can DIY the engine and cabin filters, while the dealer adds an intake/MAF check and OEM-spec parts verification.

Both filters are accessible, but proper seating and sealing matter to prevent unmetered air or blower noise. Our Honda-trained team confirms fitment, inspects the airbox snorkel and gaskets, and disposes of the old parts. Prefer a pro install? Review service specials and schedule service online.

• DIY-friendly access (glove box and airbox).
• Dealer adds intake housing and MAF visual checks.
• Honda Genuine filter fit and sealing verified.

Yes—our service team installs Honda Genuine engine and cabin air filters that meet OEM specifications for the 2013 Honda CR-V.

Correct filter media and dimensions preserve airflow, reduce intake noise, and support stable fuel trims. OEM parts also ensure the cabin filter seals properly in the HVAC case to minimize bypass. If you want consistent fit and performance, book an appointment and we’ll handle the inspection and replacement.

• Exact-fit Honda Genuine filters.
• Proper sealing of airbox and HVAC tray.
• Installed by Honda-trained technicians.

Follow the 2013 Honda CR-V owner’s manual and Maintenance Minder, replacing sooner if you drive in dusty or high-pollen conditions around the Wasatch Front.

Visual checks during oil services help catch early loading from construction zones or canyon drives. If the filter looks dark or you notice hesitation, replace it to protect the 2.4L inline‑4 and mass airflow readings. Not sure what your CR-V needs today? Schedule service for a quick inspection.

• Use the Maintenance Minder as your baseline.
• Shorten intervals for dust, pollen, or gravel roads.
• Replace if performance or MPG declines.

Use the 2013 Honda CR-V maintenance schedule as your baseline and replace sooner during heavy pollen seasons or inversion periods in Salt Lake City.

A loaded cabin filter restricts airflow and can cause window fogging or musty odors. If you sneeze more or the vents feel weak, inspect and replace the filter for clearer air and consistent HVAC performance. For OEM parts and proper sealing, check our service specials and schedule service.

• Increase frequency for allergy seasons.
• Restore airflow and defogging performance.
• Helps the blower motor work more efficiently.

Your 2013 Honda CR-V faces everything from weekday I-15 traffic to weekend canyon drives. Our Murray location supports the greater Salt Lake City area—Millcreek, Taylorsville, Sandy, and Holladay—with OEM-spec engine and cabin air filter care. We inspect the intake housing, confirm the mass airflow sensor area is clean, and install Honda Genuine filters for proper fit and sealing. That means the engine breathes correctly and the HVAC delivers clean, consistent airflow for you and your passengers. Booking is simple: use our online schedule service tool anytime, and review current service specials before you come in. Clear, itemized service and factory-trained expertise help your CR-V stay responsive and comfortable—season after season in Utah.

Our air filter service for the 2013 Honda CR-V focuses on fit, sealing, and airflow. First, we inspect the engine airbox, snorkel, and seals, then replace the engine air filter with a Honda Genuine part and verify the lid fasteners and gaskets are seated correctly. Next, we lower the glove box, remove the cabin filter tray, and install a new Honda Genuine cabin filter, making sure the airflow arrow and edges align to prevent bypass. A visual mass airflow (MAF) sensor and intake check helps confirm stable readings and smooth idle. We finish with a quick HVAC airflow check and proper disposal of old filters. If you want to plan ahead, browse our service specials and then schedule service online at your convenience.

The 2013 Honda CR-V uses a panel-style engine air filter for its 2.4L inline-4 (regular unleaded, 185 hp) and a rectangular cabin filter mounted behind the glove box. Honda recommends following the owner’s manual and Maintenance Minder for both components, with earlier replacement if your routes include dusty roads, canyon commutes, or seasonal pollen. An OEM-spec engine filter protects fuel trims and throttle response, while a properly sealed cabin filter improves interior air quality and HVAC efficiency. Using Honda Genuine filters ensures exact dimensions, media, and sealing surfaces designed for this model. Bring your 2013 Honda CR-V to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.