2013 Honda Crosstour Tires in Murray, UT

There is no single interval to state for this model year. The vehicle's service history, tire condition, and maintenance guidance should be considered together. An inspection can identify wear that calls for attention sooner.

• Review the manufacturer's maintenance guidance.
• Check for uneven wear across all four tires.
• Combine rotation with a regular service visit when appropriate.

The rotation follows the pattern specified for the Crosstour's drivetrain and the tires fitted. The inspection also supports a recommendation for rotation or replacement based on what is found. This process addresses the complete set rather than one tire alone.

• Measure tread depth on all four tires.
• Rotate in the applicable manufacturer-specified pattern.
• Set pressure and reset the monitoring system.

Directional tread and staggered fitments can change the appropriate pattern, so the tires themselves must be checked before rotation. The manufacturer-specified approach for the vehicle and its equipment is the deciding factor. A technician can confirm the correct arrangement during service.

• Confirm whether the Crosstour has front-wheel drive or all-wheel drive.
• Check whether the tread is directional.
• Inspect whether the fitment is staggered.

On an all-wheel-drive Crosstour, mismatched tread depth can load the driveline, which is why replacement decisions require an inspection of the complete set. A front-wheel-drive Crosstour may be evaluated differently, but the tire condition and service history still matter. The inspection determines whether replacement of one, more than one, or all four is appropriate.

• Compare tread condition across all four tires.
• Consider the Crosstour's drivetrain.
• Use the inspection to guide replacement planning.

Vibration at highway speed can also be a reason to schedule an inspection. A failed penny test is another general warning sign, but a technician should assess the complete set before a replacement decision. Booking service provides a tread measurement and a recommendation based on what is found.

• Look for a moulded tread-depth indicator level with the tread.
• Watch for uneven wear across the tire set.
• Schedule an inspection if highway vibration develops.

The service team can measure all four tires, perform the appropriate rotation, set pressure to the vehicle placard, and reset the monitoring system. The inspection also supports a recommendation for rotation or replacement. Visit 5808 South State Street, Murray, Utah 84107, or review available service specials.

• Use the online appointment scheduler.
• Call (385) 425-4756 for assistance.
• Bring the 2013 Honda Crosstour to the Murray service location.