2014 Honda Accord-Plug-In-Hybrid Brake Specials

Larry H. Miller Honda Murray measures the brake components before recommending repairs for your 2014 Honda Accord-Plug-In-Hybrid. A brake assessment covers both pad material and rotor condition, helping determine whether the vehicle needs pads, rotors, or additional attention. Up-front pricing is provided for the work the vehicle actually needs.

• Pad material is measured on all four corners.
• Rotor thickness and runout are measured.
• Current Brake Specials are applied to eligible work.

The service team first checks the pads, rotors, calipers, hoses, hardware, and brake fluid condition. Front and rear brake work may be different because each axle is assessed separately. Scheduling ahead helps the team plan the inspection and apply the current Brake Specials to needed work.

• Front and rear systems are evaluated separately.
• Rotor thickness and runout are checked.
• Brake fluid condition is included in the assessment.

The maintenance schedule does not establish a brake-pad replacement interval for the 2014 Honda Accord-Plug-In-Hybrid. Stop-and-go driving, repeated braking, and other operating conditions can affect wear. A measurement of the remaining material provides a more useful answer for the vehicle at the time of service.

• Pad material is measured on all four corners.
• Rotor thickness and runout are checked with the pads.
• Calipers, hoses, hardware, and brake fluid are inspected.

These symptoms can involve pads, rotors, hydraulic components, or brake fluid. Dark-looking fluid can also indicate that the system deserves inspection. Larry H. Miller Honda Murray checks the braking system together so a symptom is not evaluated in isolation.

• Listen for squealing, scraping, or grinding.
• Pay attention to pedal softness or pulsation.
• Schedule an inspection if a brake warning light appears.

This process assesses the complete brake system before repair recommendations are made. The service helps identify whether wear is limited to pads or also affects the rotors and related components. The current Brake Specials can be applied to whatever the inspection shows the vehicle needs.

• Pad material is measured at all four corners.
• Rotor thickness and runout are measured.
• Calipers, hoses, hardware, and brake fluid are inspected.

If the rotors remain within specification and their condition supports continued use, pads may be appropriate. If rotor measurements or surface condition do not support reuse, pads and rotors may be recommended together. The inspection at Larry H. Miller Honda Murray supplies the measurements behind that decision.

• Rotor thickness is measured.
• Rotor runout is checked.
• Recommendations are based on the complete brake assessment.

Independent shops may offer different parts or labor pricing, while dealership service can provide a vehicle-specific inspection and access to Honda service expertise. The brake process here measures pads and rotors and checks related components before work is recommended. Comparing the written inspection and scope of work can help you decide.

• Pad and rotor measurements are part of the assessment.
• Calipers, hoses, hardware, and fluid condition are checked.
• Brake Specials can be applied to qualifying work.

Brake wear can involve more than the pad material, so continued driving should not be based on noise alone. Larry H. Miller Honda Murray inspects the pads, rotors, calipers, hoses, hardware, and brake fluid to identify the condition of the system. If braking feels unsafe, avoid driving until the vehicle can be assessed safely.

• Do not ignore grinding or scraping.
• Watch for a soft or pulsing brake pedal.
• Arrange a brake inspection when a warning light appears.

The dealership service center is open Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM. Sunday is closed. Drivers can use the schedule service form or call the service department at (801) 719-5451. The facility also offers a modern waiting area with Wi-Fi, device charging stations, television, and complimentary food and beverages.

Brake wear is evaluated as a system rather than as a single part. That helps clarify whether the vehicle needs pad replacement, rotor work, or additional brake-system attention. The maintenance schedule does not establish a brake-pad replacement interval for this model year, so measured condition and symptoms guide the recommendation. Current service specials can be applied to the work the vehicle actually needs.

To arrange an inspection, schedule service online or call (801) 719-5451.

No fixed brake-pad replacement interval is established by the maintenance schedule for this model year. Instead, the remaining pad material, rotor measurements, component condition, and driver symptoms guide the recommendation. Squealing, scraping, grinding, pedal pulsation, a soft pedal, a brake warning light, or dark-looking fluid are reasons to arrange an inspection.

Bring your 2014 Honda Accord-Plug-In-Hybrid to Larry H. Miller Honda Murray in Murray for a brake-system assessment and schedule service.