2014 Honda Cr-V Oil Change in Murray, UT

The 2014 Honda CR-V uses SAE 0W-20 full synthetic oil meeting Honda OEM specifications.

This viscosity provides reliable cold-start flow in Murray winters and stable protection during summer heat. Using OEM-spec full synthetic with a genuine Honda filter helps maintain performance and can support warranty compliance. Our team installs the correct oil and documents the service in your records.

• SAE 0W-20 full synthetic recommended by Honda
• Installed with an OEM-quality oil filter
• Service documented for maintenance records

The 2014 Honda CR-V typically requires approximately 4.4 quarts when replacing the filter.

Capacity can vary slightly by drain time and filter used, but filling to the dipstick’s upper mark after warm-up is the goal. Our technicians measure precisely and verify the level after a short engine run to ensure proper lubrication and prevent overfill.

• Approximate capacity: 4.4 quarts with filter
• Final level confirmed on the dipstick when warm
• Used oil is recycled per environmental standards

Follow Honda’s maintenance minder; many drivers see about 7,500-mile intervals, with shorter intervals under severe conditions.

Cold starts, dusty roads, frequent short trips, and towing shorten oil life—conditions common around the Wasatch Front. We read your CR-V’s maintenance minder and adjust for climate and driving. If your minder calls for service sooner, schedule promptly to protect the engine.

• Maintenance Minder-based oil-life monitoring
• Shorter intervals for severe-duty driving
• Service records kept for warranty support

Most dealership oil changes are completed in about 45–60 minutes, including a multi-point inspection.

Timing can vary with shop volume, added services, and your CR-V’s inspection findings. Larry H. Miller Honda Murray offers same-day availability and an updated lounge with Wi‑Fi while you wait. You can also drop off and use our local shuttle.

• Typical visit: 45–60 minutes
• Includes complimentary multi-point inspection
• Same-day appointments available

Dealer service includes OEM-spec oil and filter, a complimentary multi-point inspection, and service records that help preserve warranty coverage.

Quick-lube shops can be convenient, but dealership technicians are factory trained on your CR-V and use Honda-approved parts and procedures. You also receive documentation tied to your VIN for future warranty or resale needs. Review our current service specials to maximize value.

• Factory-trained Honda technicians
• OEM-spec oil, filter, and torque procedures
• VIN-tied service documentation

Missing required oil changes can jeopardize warranty coverage because OEM maintenance compliance must be documented.

Keep receipts and service records that show mileage and date for each oil change. Warranty work generally requires a certified facility to diagnose and repair; routine maintenance performed to spec supports any future claims. We store your CR-V’s records electronically for easy proof.

• Documented maintenance supports warranty coverage
• Certified facility recommended for warranty work
• Digital records kept with your VIN

Full synthetic offers the best high-temperature stability and cold-start protection for the 2014 Honda CR-V compared to blend or conventional.

Honda specifies 0W-20 full synthetic for balanced efficiency and protection. Synthetic blends improve over conventional but don’t match full synthetic’s oxidation resistance and low-temperature flow. We install the oil type and viscosity your owner’s manual calls for.

• Honda-spec 0W-20 full synthetic recommended
• Better oxidation resistance than conventional
• Improved cold-flow for winter starts

Yes—Saturday service hours are 8:00 AM to 5:00 PM.

This helps you fit a 2014 Honda CR-V oil change into a busy week. Weekday hours run 7:00 AM to 6:00 PM, with same-day availability and a local shuttle. Book online anytime using our scheduling tool.

• Saturday: 8:00 AM – 5:00 PM
• Monday–Friday: 7:00 AM – 6:00 PM
• Schedule service online 24/7

Use our online tool to schedule in minutes at https://www.lhmhonda.com/service/appointment-form.htm.

You can choose a time that fits your day, request a shuttle, and add notes about your CR-V. For quick questions, call the service team at (801) 719-5451. Check service specials before you book.

• Online scheduling available 24/7
• Phone: (801) 719-5451
• Address: 5808 South State Street, Murray, UT

The 2014 Honda CR-V is engineered for SAE 0W-20 full synthetic oil to balance fuel economy and engine protection in diverse Utah weather. Typical refill with a filter change is about 4.4 quarts; our technicians fill to the correct level, then verify on the dipstick at operating temperature. Follow Honda’s maintenance minder for interval timing, with shorter intervals advisable for severe duty such as frequent short trips, cold starts, or dusty roads. We install a Honda-approved oil filter and properly torque the drain plug and housing seals. No widespread oil-related TSBs are commonly cited for this model when serviced on schedule. Bring your 2014 Honda CR-V to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

Your service includes a careful drain and fill, installation of OEM-spec 0W-20 full synthetic oil, and a Honda-quality filter. We perform a complimentary multi-point inspection, check and top off fluids, set tire pressures, and reset your maintenance minder. Fasteners are torqued to spec and any gaskets or crush washers required are replaced. You leave with a detailed report and digital records tied to your VIN for future reference. Warranty work generally requires a certified facility; maintaining records of on-time oil changes supports coverage and resale value. Ready to book? Schedule service now or call (801) 719-5451 with any questions.

Honda-trained technicians at Larry H. Miller Honda Murray service the 2014 Honda CR-V with OEM-approved oil and parts, addressing the realities of local driving. Cold winter starts demand quick oil pumpability, while summer heat and I‑15 traffic increase oxidation stress—both are handled well by 0W-20 full synthetic. Dust from construction zones and canyon drives can shorten service intervals; we tailor recommendations to your conditions and maintenance minder. Enjoy a recently remodeled lounge with Wi‑Fi, device charging, and complimentary refreshments. For directions or to reserve a time, use our schedule appointment tool, explore service specials, or call (801) 719-5451. We’re located at 5808 South State Street in Murray, Utah, with same-day availability and a local shuttle to keep your day on track.