Larry H. Miller Honda Murray
2014 Honda CR-V Oil Filter
Honda Oil Filter service at Larry H. Miller Honda Murray in Murray, UT
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2014 Honda CR-V has its oil changed?The oil filter should be replaced with the oil when the service calls for an oil and filter change.
The filter captures debris carried by the oil, so replacing both keeps the fresh oil moving through a renewed filter. The timing of maintenance should follow the manufacturer's schedule and the vehicle's service history. Larry H. Miller Honda Murray can inspect the vehicle and perform the oil filter service together.
- Filter matched to the engine
- New drain plug gasket or washer where applicable
- Leak check after the engine runs
What is included in an oil filter replacement on a 2014 Honda CR-V?The service includes an engine-matched filter, a new drain plug gasket or washer where applicable, and a post-service leak check.
The filter is replaced alongside the oil so the fresh oil does not immediately pass through a loaded filter. After installation, the engine is run and the filter seal is checked for leaks. This process addresses the filter and its sealing surfaces rather than treating the oil change as a separate task.
- Filter selected for the CR-V engine
- Sealing component renewed where the engine uses one
- Filter seal checked after operation
What happens if the oil filter on a 2014 Honda CR-V is not replaced?A loaded filter can open its bypass valve, allowing oil to circulate without being filtered.
The engine continues receiving oil, but it is not receiving oil that has passed through the filter. That can happen quietly while debris remains in circulation. Replacing the filter with the oil renews its ability to hold the material the oil carries away.
- Oil may darken quickly after a change
- The engine may sound noisier than usual
- An oil-pressure warning may appear
Does a 2014 Honda CR-V need a specific oil filter?Yes, the filter is matched to the 2.4-liter, four-cylinder engine in the 2014 Honda CR-V.
Filters are not interchangeable across engines because fit and filtration requirements can differ. Larry H. Miller Honda Murray selects a filter for the engine actually fitted to your vehicle, without relying on a generic match. The filter is then installed with the oil and checked for leaks after the engine runs.
- 2.4-liter engine displacement
- Four-cylinder inline-four layout
- Engine-matched filter selection
Can the oil be changed on a 2014 Honda CR-V without changing the filter?Oil can be changed separately, but an oil and filter service replaces the filter at the same visit.
A filter holds debris removed from the oil, and its bypass valve can open once the filter loads. Installing fresh oil while retaining a loaded filter does not renew that part of the filtration system. The appropriate service depends on the manufacturer's schedule, an inspection, and the vehicle's service history.
- Filter captures circulating debris
- Loaded filters may allow unfiltered oil flow
- Oil and filter service renews both components
How do I book an oil and filter service at Larry H. Miller Honda Murray?You can schedule an appointment online or call Larry H. Miller Honda Murray at 385-425-4756.
The service center is at 5808 S. State Street in Murray, Utah. Online scheduling helps you request the oil and filter service for your 2014 Honda CR-V, and the service team can address the engine-matched filter, sealing component, and leak check.
- Online service scheduling
- Monday–Friday hours from 7:00 AM to 6:00 PM
- Saturday hours from 8:00 AM to 5:00 PM
Related Pages
Helpful Links
