2016 Honda Fit in Murray, UT | Larry H. Miller Honda Murray

The 2016 Honda Fit’s engine air filter sits inside a rectangular airbox in the engine bay, typically on the driver side, ahead of the intake tubing.

Pop the hood and locate the plastic airbox secured with clips or screws; the filter slides out once the cover is removed. Keeping this filter clean protects the 1.5L inline-four from dust common on Utah roads. If you’d like help, our team can inspect and replace it during a same-day visit in Murray.

• Access via airbox cover clips/screws
• Filter protects the 1.5L i-VTEC intake tract
• Quick inspection available during any service

The 2016 Honda Fit’s cabin air filter is located behind the glove box, accessed by lowering the glove box and removing the access panel.

This filter cleans the air entering the HVAC system, reducing dust, pollen, and odors in the cabin. Some trim pieces must be handled carefully to avoid damage. Our technicians in Murray can replace it quickly and verify proper airflow before you leave.

• Access behind glove box door
• Improves HVAC airflow and cabin air quality
• Technician install prevents clip/hinge damage

The engine air filter protects the 1.5L engines intake from debris, while the cabin air filter cleans air entering the HVAC system for passengers.

Both filters support performance and comfort, but they serve different systems and live in different locations. The engine filter sits in the under-hood airbox; the cabin filter is behind the glove box. We install genuine Honda filters to match OEM airflow and filtration specs.

• Engine filter = combustion air; cabin filter = passenger air
• Separate service intervals and access points
• OEM filters preserve performance and HVAC efficiency

Common signs include reduced power or mpg for the engine filter and weak HVAC airflow or musty odors for the cabin filter.

A dirty engine filter can cause sluggish acceleration or a rough idle as the 1.5L struggles to draw air. A clogged cabin filter restricts vent output and can carry a dusty, damp smell. If you notice these symptoms in Murray, schedule a quick inspection and well verify with an OEM-spec replacement if needed.

• Engine: lower mpg, hesitation, rough idle
• Cabin: weak vents, odors, extra fan noise
• Visual check confirms dirt, debris, or discoloration

The engine filter is often DIY-friendly, while the cabin filter can require trim care; dealer service adds OEM parts and system checks.

Many owners can swap the under-hood engine filter with basic tools. The cabin filter sits behind the glove box where clips and hinges can be damaged if forced. Our Honda-certified team also inspects the intake housing and MAF area and installs genuine Honda filters. You can schedule service online for same-day availability.

• DIY engine filter; careful handling needed for cabin
• Dealer installs OEM filters and checks sealing/fit
• Intake/MAF visual included during replacement

Yes—Larry H. Miller Honda Murray installs genuine Honda OEM air filters to meet factory specifications.

OEM filters maintain correct airflow and filtration for the 1.5L engine and HVAC system, supporting performance and resale value. Our factory-trained technicians use Honda-approved tools and verify fitment and sealing after installation. For convenience, book a schedule service time or check service specials.

• Honda Genuine engine and cabin filters
• Factory-trained Honda technicians
• Fitment and seal check after install

Follow the interval in the Honda maintenance schedule for the 2016 Honda Fit, then shorten it if you drive in dusty conditions.

Utah driving can expose your intake to dust and road debris, which loads the filter faster than average. Well inspect the engine filter at each visit and advise based on its condition. For an efficient check in Murray, use our schedule service tool for same-day availability.

• Use the Honda maintenance schedule as your baseline
• Advance service if you see heavy dust or debris
• Visual inspection confirms replacement timing

Follow the cabin filter interval in the 2016 Honda Fit owners manual, replacing sooner if airflow weakens or odors appear.

Pollen, dust, and urban traffic can accelerate cabin filter loading and reduce vent performance. We check cabin filter condition during service and recommend an OEM replacement when restriction is evident. If your vents feel weak in Murray, book a quick schedule service visit.

• Use owners manual interval as baseline
• Replace early if airflow drops or odors persist
• OEM filter restores HVAC efficiency

Air filter replacements are typically completed the same day during service hours (Mon–Fri 7:00 AM–6:00 PM; Sat 8:00 AM–5:00 PM).

Our team offers same-day service availability and efficient check-in at 5808 South State Street in Murray, Utah. Most visits fit comfortably within a routine appointment, and you can relax in our modern lounge with complimentary Wi‑Fi and beverages. Reserve your spot through the schedule service tool or call (801) 719-5451.

• Same-day service availability
• Extended weekday and Saturday hours
• Online scheduling for guaranteed time slots

During a 2016 Honda Fit air filter service, our factory-trained Honda technicians perform a targeted series of checks to protect both performance and cabin comfort. We start with an inspection of the under-hood airbox, seals, and ducting, then remove and evaluate the engine air filter for dirt loading, tears, or moisture. If replacement is needed, we install a genuine Honda filter and confirm proper airbox sealing. Next, we access the cabin air filter behind the glove box, inspect for debris and restriction, and replace it with an OEM filter if warranted. A visual check of the intake tract and MAF sensor area helps catch early issues, and we dispose of old filters responsibly. Ready to breathe easier? Use our online tool to schedule service or call (801) 719-5451.

The 2016 Honda Fit uses two filters: an engine air filter that safeguards the 1.5L inline-4’s intake and a cabin air filter that purifies HVAC airflow for passengers. Honda Genuine filters are engineered to match OEM dimensions, pleat density, and airflow, ensuring correct fit in the airbox and behind the glove box. Follow the maintenance guidance in your owner’s manual for replacement timing; adjust sooner if you frequently encounter dust, construction zones, or extended idling. If you notice reduced engine response, weaker vents, or musty odors, an inspection is due. Bring your 2016 Honda Fit to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.

Air quality and road conditions can change quickly in the Salt Lake Valley, which means filters in a 2016 Honda Fit may load up faster than expected. Our team at Larry H. Miller Honda Murray provides same-day appointments, clear communication, and genuine Honda parts to restore proper airflow for both engine and cabin. Visit us at 5808 South State Street in Murray, Utah, and relax in a modern lounge with reliable Wi‑Fi, charging stations, television, and complimentary food and beverages while we work. When you’re ready, schedule service online, check current service specials, or call (801) 719-5451 for directions and availability.