2017 Honda Ridgeline Coolant in Murray, UT

These signs can reflect depleted coolant protection or a leak in the cooling system. Do not open the system while it is hot or under pressure; checking it is done cold. A pressure test and inspection can separate a service need from a repair concern.

• Temperature gauge running higher than usual
• Sweet smell or puddle under the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The replacement coolant uses the type and concentration the manufacturer specifies for this vehicle. The pressure test helps identify leaks, while the component inspection looks for conditions that can affect cooling performance. This process evaluates both coolant condition and system integrity.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

That schedule is the appropriate guide for replacement rather than appearance alone. Coolant condition can also be tested during a service visit between scheduled points, especially when warning signs appear. A technician can then distinguish a routine service need from a leak or another condition requiring attention.

• Follow the manufacturer's published maintenance schedule
• Test coolant condition at a service visit
• Investigate unusual temperature, smell, or fluid loss

Coolants are not interchangeable simply because they appear similar. Colour is not a reliable guide to what is in the bottle, so the correct choice should be confirmed through the vehicle's manufacturer specification. Larry H. Miller Honda Murray can service the system using the required formulation without relying on colour as identification.

• Use the manufacturer-specified coolant type
• Do not treat different coolants as interchangeable
• Do not use colour alone to identify coolant

A level that keeps dropping indicates a leak rather than normal consumption and calls for an inspection. The system is hot and under pressure after running, so check it only when cold and do not open it while hot. A pressure test can help locate the cause.

• Top-off restores level only
• Repeated loss points to a possible leak
• Check the system cold, never while hot or pressurized

The service center is at 5808 South State Street in Murray, Utah. Online scheduling supports a convenient appointment request, and the team can evaluate coolant condition, pressure-test the system, and inspect related components. Review service specials before booking if they apply to your visit.

• Schedule appointment online
• Call 385-425-4756
• Visit 5808 South State Street, Murray, UT 84107