2017 Honda Ridgeline Oil Change in Murray, UT

Pricing is shown up-front in our online scheduler at Larry H. Miller Honda Murray before you confirm your appointment.

Exact totals vary by oil type and filter selection, but we publish transparent pricing so you know your cost in advance. You can check available times, see your price, and apply any current offers in minutes. Our Honda service center in Murray uses OEM-spec oil and a factory-approved filter for your 3.5L V6.

• View live pricing and times: schedule service
• Apply local offers: service specials
• Visit us: 5808 South State Street, Murray, UT 84107

Appointment times and estimated visit length are displayed in our scheduler so you can plan a same-day visit with minimal downtime.

Actual time depends on shop load and any additional inspections you request. Booking ahead ensures a defined drop-off window and helps us turn your 2017 Honda Ridgeline efficiently. You can wait in our lounge or arrange a ride after check-in.

• Choose a precise slot: schedule service
• Plan around your day with published time estimates
• OEM-trained technicians service Honda engines daily

Follow the maintenance interval in your Honda owner’s manual; Utah’s cold starts, dust, towing, and short trips may require more frequent service.

Driving in the Wasatch Front—think winter mornings, canyon dust, and stop-and-go along I-15—can accelerate oil degradation. If your 2017 Honda Ridgeline sees frequent short trips or heavy loads, choose the “severe” schedule in the manual. We’ll document service to help protect warranty coverage and long-term engine health.

• Tailor intervals to Murray and greater Salt Lake City conditions
• Keep dated receipts to document compliance
• Book your next visit online: schedule service

Use engine oil that meets Honda’s OEM specification listed in your owner’s manual and on the oil cap.

Spec-compliant oil protects the 3.5-liter V6 and its emissions system under Utah’s temperature swings. Our Murray service team installs OEM-spec oil and a factory-approved filter to match Honda’s requirements. If you’re unsure which viscosity is specified, bring your truck and we’ll verify and document the fill on your repair order.

• We install OEM-spec oil and Honda-approved filters
• Viscosity verified against your manual and oil cap
• Get it done right: schedule service

Fill to the capacity specified in the owner’s manual and confirm on the dipstick after installation.

Correct capacity prevents aeration and overfill in the 3.5L V6. Our technicians drain and measure, install a new filter, fill to spec, then verify the level warm. We also note the exact quantity used on your invoice for future reference in Murray’s varied climate.

• Capacity verified by manual and post-fill dipstick check
• Exact quantity recorded on your repair order
• Book a precise, documented fill: schedule service

Yes—dealer service uses OEM-spec Honda oil and filters and includes a multi-point inspection documented to factory standards.

Independent quick-lube shops can be convenient, but they may not use Honda-approved parts or document service the way a dealer does. At Larry H. Miller Honda Murray, we include fluid top-offs and dispose of used oil properly, helping preserve warranty coverage. You decide what fits your needs; we provide up-front pricing and documentation.

• OEM-spec oil and factory-approved filter included
• Multi-point inspection and fluid top-offs
• Transparent booking: schedule service

Skipping required oil changes can jeopardize warranty coverage on related engine or lubrication failures.

Honda requires maintenance be performed at the prescribed intervals and documented with receipts. If a lubrication-related issue arises, service records help demonstrate proper care. Warranty work generally requires a certified facility; our dealership provides OEM documentation to support future claims.

• Keep dated invoices and mileage at each visit
• Use OEM-spec oil and filters to meet requirements
• Book and archive records: schedule service

Full synthetic provides superior high‑temperature stability and cold‑start pumpability versus blend or conventional oils.

Those advantages matter along the Wasatch Front, where winter mornings and mountain grades stress lubricants. Synthetic blends improve on conventional, while full synthetic typically resists oxidation and deposits best. Always match viscosity and spec to your owner’s manual; we’ll install oil that meets Honda’s OEM requirement and note it on your invoice.

• Better cold-flow for winter starts in Murray, UT
• Improved thermal stability for canyon climbs
• Spec-verified fill and documentation provided

Your 2017 Honda Ridgeline benefits from a methodical, OEM-aligned process designed for consistent results in Utah’s conditions. We begin with a warm-up and safety inspection, then drain the oil completely and replace the crush washer where applicable. A factory-approved oil filter is installed to protect the 3.5L V6 under cold starts and canyon climbs. We fill with oil that meets Honda’s OEM specification, verify level on the dipstick after a warm restart, and reset maintenance indicators if equipped. A multi-point inspection follows, including brakes, battery, belts, and visible leaks. Fluids are topped off, tires are checked for pressure and wear, and used oil is recycled responsibly. Documentation of the service—oil type, quantity, and mileage—is saved to your record to help preserve warranty eligibility. Ready for professional care and clear records? Schedule service now.

The 2017 Honda Ridgeline is powered by a 3.5‑liter V6 (engine code 6VNAG3.5) making 280 hp and 262 lb‑ft, optimized for regular unleaded fuel. To safeguard this engine, always use oil that meets Honda’s OEM specification and the viscosity listed in your owner’s manual and on the oil cap. Our team confirms the correct capacity during service and records the exact quantity on your invoice for reference. In Utah’s climate, proper viscosity selection supports cold‑start flow in winter and film strength during hot, high‑load driving. Follow the standard interval in the manual, and adjust sooner for severe conditions such as frequent short trips, dusty roads, towing, or extended idling. For documented, OEM‑spec results, bring your 2017 Honda Ridgeline to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

We serve drivers across the greater Salt Lake City area—including Millcreek, Taylorsville, Sandy, and Holladay—from our facility at 5808 South State Street, Murray, UT 84107. Factory-certified, OEM-trained technicians service the 2017 Honda Ridgeline with parts and procedures aligned to Honda guidance. Local conditions matter: cold-start pumpability in winter, dust ingestion on canyon roads, towing and payload on weekend trips, and urban stop‑and‑go all influence oil life. We match the oil to your driving profile, verify the level warm, and document the visit thoroughly. Check current offers on our service specials page and pick a time that fits your day through our online scheduler. Need directions or a ride option? Add a note when you schedule an appointment, or visit us at our Murray address for check-in.