2018 Honda Fit Tires in Murray, UT

Many owners have tire rotation performed alongside an oil change or during another scheduled service visit. The vehicle’s maintenance schedule settles the interval, while actual tire condition can justify an inspection sooner. Larry H. Miller Honda Murray can measure all four tires and recommend service based on the results.

• Manufacturer-published interval: every 10,000 miles.
• Tread depth is measured on all four tires.
• Pressure is adjusted to the vehicle placard specification.

The rotation follows the pattern the manufacturer specifies for this front-wheel-drive vehicle. Inspection also gives the technician a chance to identify uneven wear, vibration concerns, or a tread-wear indicator that has reached the tread surface. A replacement recommendation is based on what the inspection finds.

• All-four-tire tread-depth measurement.
• Rotation in the manufacturer-specified pattern.
• Pressure adjustment and monitoring-system reset.

The manufacturer-specified pattern should be followed for the vehicle and tire setup rather than assumed in advance. Directional tread can restrict how a tire moves between sides, while staggered fitments can change which positions are appropriate. The technician should confirm the tires fitted and then apply the correct pattern during service.

• The 2018 Honda Fit has front-wheel drive.
• Directional tread can limit side-to-side movement.
• Staggered fitments can change the applicable rotation pattern.

Front-wheel drive differs from all-wheel drive, where mismatched tread depth can load the driveline and make replacing tires as a set especially important. On this Honda, the condition and tread difference across the tires should guide the decision. The tires actually fitted, their wear, and the vehicle’s service history are relevant when determining whether one, two, or four tires should be replaced.

• Front tires may wear faster because they steer and drive.
• All four tires should still be inspected together.
• Replacement recommendations depend on measured condition.

Uneven tread wear across the set and vibration at highway speed are also reasons to arrange an inspection. A technician can measure tread depth on all four tires and compare their condition before recommending rotation or replacement. The tires’ actual condition, rather than the vehicle model alone, determines the next step.

• Check whether a molded tread-wear indicator meets the tread surface.
• Use the penny test as a basic visual check.
• Schedule an inspection for vibration or uneven wear.

The service center is located at 5808 South State Street in Murray, Utah. Booking provides tread-depth measurement on all four tires and a rotation or replacement recommendation based on what the inspection finds. You can also review current service specials before arranging your visit.

• Schedule online through the dealership service appointment form.
• Call the service department at (385) 425-4756.
• Visit 5808 South State Street, Murray, UT 84107.