2019 Honda Insight Oil Change in Murray, UT

The 2019 Honda Insight holds approximately 3.7 quarts of engine oil with a filter change.

This hybrid’s 1.5L inline-4 uses a modest oil volume to support high efficiency and quick lubrication on cold starts in Murray’s varied climate. Our team at Larry H. Miller Honda Murray confirms fill levels after each service and resets the maintenance minder so you leave with accurate service tracking.

• Estimated capacity: ~3.7 quarts with filter
• Measured fill confirmed by dipstick and scan-tool reset
• Proper level supports 55/49 MPG (city/highway) efficiency targets

Honda specifies full-synthetic 0W-20 motor oil for the 2019 Honda Insight.

Full-synthetic 0W-20 provides the right viscosity for cold-start pumpability in Utah winters and heat stability during summer freeway climbs. At Larry H. Miller Honda Murray, we install Honda Genuine or OEM-spec 0W-20 oil and a matching OEM-quality filter to protect the hybrid’s gasoline engine and maintain warranty compliance.

• Viscosity: 0W-20 full synthetic
• Meets Honda OEM performance standards
• Includes new crush washer and OEM-spec filter

Plan for about every 7,500 miles under normal driving, and closer to 5,000 miles in severe-duty conditions.

The 2019 Honda Insight uses Honda’s Maintenance Minder, which adjusts based on driving style and climate. In Murray, UT, frequent short trips, dust, heat, or cold starts can shorten intervals. Our advisors will note your driving profile and set reminders aligned to your usage.

• Normal: ~7,500 miles (follow Maintenance Minder)
• Severe duty: ~5,000 miles (dust, extreme temps, short trips)
• Service records maintained for warranty support

Most 2019 Honda Insight oil changes are completed in about 45–60 minutes.

Our factory-trained technicians work efficiently while including a complimentary multi-point inspection and proper Maintenance Minder reset. Same-day availability is common, and you can schedule service online for the time that fits your day.

• Typical bay time: 45–60 minutes
• Includes multi-point inspection and fluid top-offs
• Comfortable lounge with Wi‑Fi and refreshments

Dealers use OEM-spec 0W-20 oil, Honda-quality filters, and document maintenance that supports warranty compliance.

Quick-lube shops can be convenient, but hybrid-specific needs favor OEM procedures and parts. At Larry H. Miller Honda Murray, your service includes a multi-point inspection, fluid top-offs, and proper Maintenance Minder reset—details often missed elsewhere.

• OEM-spec oil/filter and crush washer
• Maintenance Minder reset and service record
• Complimentary inspection and disposal included

Missing required oil services can jeopardize warranty coverage if an engine issue is linked to lack of maintenance.

Honda requires following the Maintenance Minder and using the correct 0W-20 full-synthetic oil and quality filters. Keep dated receipts and service records; warranty work typically requires service at—or documentation from—a certified facility like Larry H. Miller Honda Murray.

• Follow Maintenance Minder intervals
• Use OEM-spec 0W-20 full synthetic
• Maintain records to support any claims

The 2019 Honda Insight is engineered for full-synthetic 0W-20, which outperforms blends and conventional oil in protection and cold-start flow.

Full synthetics resist breakdown, reduce deposits, and maintain viscosity in Utah’s temperature swings. While blends are better than conventional, Honda’s hybrid design is optimized for full synthetic to protect efficiency and longevity.

• Required: 0W-20 full synthetic
• Better oxidation and thermal stability
• Improved cold-start pumpability in winter

Larry H. Miller Honda Murray services the 2019 Honda Insight at 5808 South State Street in Murray, Utah.

Our service center offers extended weekday and Saturday hours, OEM-spec oil, and complimentary multi-point inspections. Book online to secure a same-day slot or call our team for assistance.

• Address: 5808 S State St, Murray, UT
• Hours: Mon–Fri 7:00 AM–6:00 PM; Sat 8:00 AM–5:00 PM
• Schedule service or call (801) 719-5451

The 2019 Honda Insight uses full-synthetic 0W-20 motor oil engineered for efficient lubrication and low-friction performance. Capacity is approximately 3.7 quarts with a filter change, supporting quick circulation and stable viscosity under Utah’s seasonal swings. Follow Honda’s Maintenance Minder for timing; as a planning baseline, many drivers service around 7,500 miles, while severe-duty operation (frequent short trips, dust, extreme heat/cold) benefits from ~5,000-mile intervals. Our technicians install an OEM-quality filter and new crush washer, verify level, and document the visit for warranty support. If your Insight has exhibited any oil-related concerns, we will check for applicable technical bulletins and note any seepage or gasket wear during the complimentary inspection. Bring your 2019 Honda Insight to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

Service on a 2019 Honda Insight at Larry H. Miller Honda Murray is straightforward and thorough. We begin by confirming Maintenance Minder status, then drain the engine oil, replace the drain washer, and install an OEM-quality filter. Next, we fill with full-synthetic 0W-20 to the proper level, reset the Minder, and perform a complimentary multi-point inspection covering tires, brakes, fluids, belts, and visible leaks. Fluids are topped off, tire pressures set, and any findings are reviewed with you before you leave. You can check current service specials and schedule service online anytime, or call (801) 719-5451 for an appointment.

Larry H. Miller Honda Murray supports 2019 Honda Insight owners throughout the Salt Lake Valley with OEM-spec oil changes tailored to local driving. Utah’s cold winters demand 0W-20 for fast pumpability at start-up, while summer heat and canyon grades call for full-synthetic stability under load. Stop-and-go traffic and dust can shorten intervals, so our advisors calibrate recommendations to your route and mileage. Factory-trained Honda technicians perform the work and include a complimentary multi-point inspection to catch small issues early. Visit us at 5808 South State Street, Murray, with extended weekday and Saturday hours, easy online booking, and a modern lounge with Wi‑Fi and refreshments. Use our online tool to schedule service or call (801) 719-5451 for directions and availability.