Larry H. Miller Honda Murray
2020 Honda Cr-V Oil Change
Honda Oil Change service at Larry H. Miller Honda Murray in Murray, UT
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
11 common questions answered
How often should I change the oil in my 2020 Honda CR-V?The manufacturer’s published maintenance schedule calls for an oil change every 10,000 miles.
Regular oil service helps remove heat-carrying additives and debris from the engine. Larry H. Miller Honda Murray can replace the oil and filter, reset the oil-life monitor, and log the visit in the vehicle’s service history.
- Engine oil change interval: every 10,000 miles
- Oil-filter replacement interval: every 20,000 miles
- Service includes an underhood fluid-level check
What is included in a 2020 Honda CR-V oil change?A 2020 Honda CR-V oil change includes oil replacement, a new oil filter, an oil-life monitor reset, and an underhood fluid-level check.
The service is designed around the manufacturer-specified oil grade and capacity. A technician drains the used oil before refilling the engine and checking key fluid levels. Drivers can schedule an appointment online at Larry H. Miller Honda Murray.
- Drain and refill engine oil
- Install a new oil filter
- Reset the oil-life monitor
Why does a 2020 Honda CR-V need regular oil changes?Engine oil can lose its additive package and heat-and-debris-carrying ability before it looks dirty.
That is why the maintenance schedule is based on mileage and time rather than appearance alone. Dark or low oil, an oil-change reminder, or a ticking or louder engine note at startup can indicate that service is due.
- Oil protects against heat and debris
- Appearance alone does not determine oil condition
- The oil-life monitor should be reset after service
Is a dealership oil change better than a quick-lube shop for a 2020 Honda CR-V?A dealership oil change uses the manufacturer-specified oil grade and includes a new filter plus an underhood fluid-level check.
Quick-lube locations may offer a convenient option, while a Honda dealership provides service from factory-trained Honda technicians using Honda-focused diagnostic equipment. The right choice depends on the driver’s priorities, including convenience, maintenance documentation, and OEM-focused care.
- Manufacturer-specified oil grade
- New oil filter included
- Service visit logged against the vehicle’s history
Where can I get a 2020 Honda CR-V oil change in Murray, Utah?Larry H. Miller Honda Murray provides 2020 Honda CR-V oil-change service at 5808 S. State Street in Murray, Utah.
The service center supports new and pre-owned vehicles with factory-trained Honda technicians and genuine OEM parts. Its remodeled waiting area includes Wi-Fi, device charging stations, television, and complimentary food and beverages.
- Address: 5808 S. State Street, Murray, UT 84107
- Online scheduling is available
- Service specials are available online
What are the signs my 2020 Honda CR-V needs an oil change?An oil-change reminder light or mileage past the last service are direct signs that an oil change may be due.
Oil on the dipstick that looks dark or low can also prompt a service visit. A ticking or louder engine note at startup is another symptom drivers may notice. A technician can replace the oil and filter and check underhood fluid levels.
- Oil-change reminder light
- Dark or low oil on the dipstick
- Ticking or louder engine sound at startup
Does Larry H. Miller Honda Murray use genuine parts for a 2020 Honda CR-V oil change?Larry H. Miller Honda Murray uses genuine Honda parts for service, including the oil filter installed during an oil change.
Genuine OEM parts are selected to support the vehicle’s fit, safety, longevity, and resale value. The service team also uses Honda-focused tools and diagnostic equipment for maintenance support.
- Genuine Honda parts
- Factory-trained Honda technicians
- Honda-focused diagnostic equipment
How do I schedule an oil change for my 2020 Honda CR-V?You can schedule a 2020 Honda CR-V oil change through the Larry H. Miller Honda Murray online appointment form.
Online scheduling is available through the dealership’s service department. Drivers can also call the service department directly at (801) 719-5451 for assistance with booking their visit.
- Schedule service online
- View service specials
- Call (801) 719-5451
2020 Honda CR-V Oil SpecificationsThe 2020 Honda CR-V uses a 1.5-liter inline-four engine with 190 horsepower and 179 lb-ft of torque. For an oil change, the service team drains the used oil and refills the engine with the oil grade and capacity specified by the manufacturer for the vehicle. A new oil filter is installed, and the oil-life monitor is reset after the service.
The manufacturer’s published maintenance schedule calls for changing the engine oil every 10,000 miles and replacing the oil filter every 20,000 miles. Oil loses its additive package and ability to carry heat and debris over time, even when it does not appear dirty. Bring your 2020 Honda CR-V to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.
What’s Included in a 2020 Honda CR-V Oil ChangeAn oil-change visit begins with draining the used engine oil. The technician then installs a new oil filter and refills the engine with the manufacturer-specified oil grade and capacity. The oil-life monitor is reset so the maintenance reminder reflects the completed visit, and underhood fluid levels are checked.
Routine oil service helps maintain the vehicle’s service history and supports consistent maintenance scheduling. Larry H. Miller Honda Murray provides factory-trained Honda technicians, genuine Honda parts, and a remodeled waiting area with Wi-Fi, charging stations, television, and complimentary food and beverages. Schedule service online or call (801) 719-5451.
2020 Honda CR-V Oil Change Service in Murray, UtahLarry H. Miller Honda Murray provides oil-change service for new and pre-owned vehicles at 5808 S. State Street in Murray, Utah. The service center offers rapid oil changes, precision tire rotations, brake pad replacements, transmission services, and complimentary multi-point inspections. Same-day service availability and a free local shuttle service help customers keep their day moving.
Service hours are Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM; the service center is closed Sunday. Use the online scheduling tool or call (801) 719-5451 to arrange service in Murray.