2020 Honda Pilot Air Filter in Murray, UT

On the 2020 Honda Pilot, the engine air filter is inside the rectangular airbox on the driver-side of the engine bay, just ahead of the intake tube.

This location allows quick access for inspections and replacements that keep the 3.5L V6 (280 hp) running efficiently. While you’re there, it’s smart to check the intake snorkel and gasket surfaces for proper sealing. For comparison, the cabin air filter sits behind the glove box and filters air entering the HVAC system for you and your passengers.

• Release the airbox clips, lift the cover, and swap the engine filter—ensure the gasket seats flat.
• Inspect the intake snorkel for debris and confirm the MAF wiring is undisturbed.
• For cabin access, lower the glove box and remove the access panel to slide the filter out.

The engine air filter cleans intake air for the 3.5L V6s combustion, while the cabin air filter cleans air entering the HVAC system for passengers.

Each filter protects a different system: the engine filter supports power and fuel economy, and the cabin filter preserves in-cabin air quality and HVAC performance. On the 2020 Honda Pilot, the engine filter lives in the under-hood airbox; the cabin filter sits behind the glove box for easy service during seasonal pollen and wildfire smoke along the Wasatch Front.

• Engine filter: performance, efficiency, and throttle response.
• Cabin filter: HVAC airflow, odor reduction, and dust/pollen capture.
• Both should be OEM-spec for fit, seal, and filtration efficiency.

Typical signs include reduced acceleration, lower fuel economy, rough idle (engine), weak HVAC airflow, and musty or dusty odors from the vents (cabin).

In Utahs dusty and smoky seasons, filters can load faster, so periodic checks help prevent drivability or comfort issues. Inspect the engine filter for dark, debris-filled pleats and the cabin filter for lint and dust buildup. If symptoms persist after replacement, schedule a diagnostic to rule out additional intake or HVAC concerns.

• Visual check: dark or clogged pleats indicate replacement time.
• HVAC test: low airflow at higher fan speeds suggests a loaded cabin filter.
• Need help? Schedule service or review service specials.

Yesmost owners can DIY the engine air filter, and the cabin filter is also DIY but requires glove box access and careful reassembly.

DIY is straightforward if you follow the owners manual and avoid pinching gaskets or disturbing intake sensors. Dealer service adds an intake housing check, a visual MAF inspection, and proper filter seating to prevent unmetered air leaks. If you prefer a professional inspection, book an appointment and well confirm correct fitment using OEM-spec filters.

• DIY engine filter: release airbox clips, swap, and reseat evenly.
• DIY cabin filter: lower glove box, remove access panel, replace filter.
• Prefer pro service? Schedule service in Murray.

Yes, we install Honda Genuine engine and cabin air filters that meet OEM specifications for the 2020 Honda Pilot.

Factory-certified, OEM-trained technicians select parts engineered for the Pilots airbox and HVAC system to ensure proper fit, seal, and filtration. Using Honda Genuine filters helps maintain designed airflow and supports long-term reliability in Wasatch Front driving. Ask our team to show you your old filters at pickup for transparency.

• Honda Genuine filtration media sized for the Pilots housings.
• Correct gasket compression and cover torque to prevent leaks.
• Check current service specials before you book.

Air filter replacements are completed within a single service appointment; actual bay time varies by shop load.

Booking ahead helps us align your visit with available bays in Murray, minimizing wait time. During the appointment, well also perform a visual intake housing check and confirm the cabin filter is installed in the correct airflow orientation. If you need a specific time window, choose from available slots online.

• View live availability and schedule an appointment.
• Visit us at 5808 South State Street, Murray, UT 84107.
• Ask for an intake/MAF visual check with your filter service.

Follow your 2020 Honda Pilots Maintenance Minder and owners manual for the official engine air filter interval.

Driving in Utahs dust, construction zones, or wildfire smoke can shorten real-world intervals. A quick visual check at every oil change helps catch early loading. If you notice sluggish acceleration or darkened pleats, replace sooner to protect performance and fuel economy.

• Inspect at each oil change; replace when pleats are dark or clogged.
• Frequent gravel-road driving may require more frequent service.
• Need guidance? Schedule service for an inspection.

Use the 2020 Honda Pilots Maintenance Minder/owners manual for the cabin filter interval; replace sooner with heavy dust, smoke, or pollen.

Local conditions along the Wasatch Front can accelerate cabin filter loading, especially during spring pollen and late-summer smoke. If airflow weakens or odors persist, replace the filter to protect HVAC performance. Our team can show you the removed element so you can see loading firsthand.

• Watch for weak airflow or persistent musty odors.
• Consider seasonal replacement before peak pollen/smoke periods.
• Check service specials and schedule service.

Our 2020 Honda Pilot air filter service prioritizes proper fitment, sealing, and airflow for both the engine and the cabin. We begin with a visual inspection of the under-hood intake system: airbox cover, clips, gasket surfaces, and intake snorkel routing. The engine air filter is removed and checked for debris, oil contamination, and abnormal loading; we then install an OEM-spec Honda Genuine element and ensure the cover seats evenly to prevent unmetered air leaks. Next, we access the cabin filter behind the glove box, evaluate media loading and odors, and replace it with a Honda Genuine cabin filter oriented to the correct airflow arrow. We finish with a quick MAF sensor and harness visual, verify idle quality and HVAC airflow, and dispose of the old filters responsibly. Ready to book? Use our online system to schedule service in Murray.

The 2020 Honda Pilots 3.5L V6 uses an OEM air filter designed to match the factory airbox volume and intake tract, maintaining the V6s 280-horsepower calibration for smooth response. The cabin utilizes a dedicated HVAC filter mounted behind the glove box to capture dust and pollen common along the Wasatch Front. Honda Genuine filters are engineered for correct pleat count, media density, and housing seal to protect engine internals and preserve comfortable cabin airflow. Follow the Maintenance Minder and owners manual for official replacement timing, and check more often if you encounter Utahs dust, construction debris, or wildfire smoke. Bring your 2020 Honda Pilot to Larry H. Miller Honda Murray in Murray for OEM-spec filter serviceschedule service.

Serving Murray, Millcreek, Taylorsville, Sandy, and Holladay, Larry H. Miller Honda Murray understands how local road dust, mountain passes, and seasonal pollen affect air filters on the 2020 Honda Pilot. Our factory-authorized Service Center performs engine and cabin filter inspections and replacements using Honda Genuine parts to maintain proper airflow and sealing. Utahs climate can load filters faster than flatland driving, so we recommend visual checks during routine maintenance and timely replacement before performance or HVAC comfort suffer. You can plan a quick visit and see live availability online. Find us at 5808 South State Street, Murray, UT 84107, and book ahead to streamline your visit. For directions, questions, or to lock in a time, schedule service now and browse current service specials.