2022 Honda Civic Coolant in Murray, UT

These symptoms can indicate depleted coolant or a leak, and they do not identify the cause by themselves. The cooling system should be checked cold because it is pressurized and hot after running. A service visit can test the system and inspect the components that affect coolant circulation.

• Temperature gauge running higher than usual
• Sweet smell or a puddle beneath the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. The inspection helps distinguish routine coolant maintenance from a leak or component concern that needs repair. A multi-point inspection may also provide additional information about the Civic's overall condition.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

Coolant additives deplete over time even if the fluid still looks normal, so appearance is not a dependable replacement guide. A pressure test also checks for leaks, which topping off alone cannot identify. The condition found during service helps determine whether the vehicle needs coolant maintenance or additional repair.

• Follow the manufacturer's maintenance schedule
• Have coolant condition tested during a service visit
• Use pressure testing to help identify leaks

Coolants are not interchangeable, and color is not a reliable guide to what is in the bottle. Larry H. Miller Honda Murray refills the system with the type and concentration the manufacturer specifies. If the fluid has been mixed or its history is uncertain, a technician can evaluate the system during service.

• Use the manufacturer-specified coolant type
• Do not treat coolant colors as interchangeable identifiers
• Have uncertain fluid condition evaluated during service

Do not open the cooling system while it is hot or under pressure; checking it is done cold. A temporary level correction does not establish why the level changed or whether the coolant still protects internal surfaces. Book an inspection if the reservoir repeatedly becomes low, or if you notice a smell or puddle.

• Check the cooling system only when cold
• Recognize that topping off does not refresh additives
• Schedule an inspection when the level keeps dropping

The service center is located at 5808 S. State Street in Murray, Utah, and offers weekday and Saturday availability. You can also review service specials before booking. Include any temperature, odor, puddle, or reservoir-level concern so the team can focus the visit appropriately.

• Book through the online service scheduler
• Call 385-425-4756 for assistance
• Share any cooling-system symptoms when scheduling