2022 Honda Pilot Brake Specials in Murray, UT

These symptoms can involve pad wear, rotor condition, calipers, hoses, hardware, or brake fluid. A brake inspection at Larry H. Miller Honda Murray evaluates the system together rather than focusing on one component. Prompt attention is especially important before canyon travel or towing.

• Squealing may indicate a pad wear indicator.
• Pulsation can point to rotor thickness or runout concerns.
• Dark brake fluid or a warning light warrants inspection.

This process assesses the brake system as a group so worn pads, rotors, fluid, and related components can be considered together. Booking service gets the entire brake system assessed and allows current service specials to be applied to the work the vehicle needs.

• Pad material is measured on all four corners.
• Rotors are checked for thickness and runout.
• Calipers, hoses, hardware, and fluid are inspected.

If the rotors remain within specification, pads may be the only component requiring replacement. If rotor measurements do not meet specification, replacing pads and rotors together may be appropriate. Larry H. Miller Honda Murray measures rotor condition before making a recommendation, helping you choose service based on the actual brake system condition.

• Rotor thickness is measured during the inspection.
• Rotor runout is checked for braking smoothness concerns.
• Recommendations are based on measured condition.

Brake fluid condition is also inspected during brake service because fluid supports the hydraulic operation of the braking system. Dark-looking fluid, a soft pedal, or a brake warning light should be discussed with a technician. You can schedule service with Larry H. Miller Honda Murray in Murray, Utah.

• Brake fluid condition is part of the brake inspection.
• The published interval is 45,000 miles.
• A soft pedal should be evaluated promptly.

The service team works on new and pre-owned vehicles and can evaluate pads, rotors, calipers, hoses, hardware, and brake fluid. The remodeled waiting area includes Wi-Fi, device charging stations, television, and complimentary food and beverages. A free local shuttle service and online scheduling support a convenient visit.

• Address: 5808 S. State Street, Murray, UT 84107.
• Service hours are Monday–Friday, 7:00 AM–6:00 PM.
• Saturday hours are 8:00 AM–5:00 PM; Sunday is closed.

Brake wear can affect pads, rotors, fluid, calipers, hoses, and hardware, so symptoms should not be ignored. Grinding or a warning light deserves prompt inspection, while reduced braking performance may make continued driving inappropriate. Contact Larry H. Miller Honda Murray or schedule an appointment for an evaluation.

• Grinding can indicate severe pad wear.
• A soft pedal may signal a hydraulic-system concern.
• Brake warning lights should be addressed promptly.

The inspection measures pad material and rotor condition while checking calipers, hoses, hardware, and brake fluid. This helps identify whether the vehicle needs attention at the front, rear, or across the system. Review the service specials before contacting the Murray service center.

• Pad material is measured on all four corners.
• Rotor thickness and runout are evaluated.
• Specials are applied to qualifying needed work.

Measuring pad material on all four corners provides a more complete view than inspecting only the axle with a noise or symptom. Rotor thickness and runout measurements help identify additional work that may be needed. This approach is useful for a 2022 Honda Pilot used for commuting, canyon driving, or towing.

• Front and rear pad material is measured.
• Rotors are checked for thickness and runout.
• Brake fluid and related hardware are inspected.

The service center supports new and pre-owned vehicles with factory-trained Honda technicians, genuine Honda parts, online scheduling, same-day service availability, and a free local shuttle service. Customers can relax in a remodeled waiting area with Wi-Fi, charging stations, television, and complimentary food and beverages. Service hours are Monday–Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM.

For directions or scheduling, visit the service center at 5808 S. State Street, Murray, UT 84107, use the service appointment form, or call 385-425-4756.

Brake wear can present as squealing, scraping, grinding, a pulsing or soft pedal, a brake warning light, or brake fluid that looks dark. These symptoms do not identify one guaranteed failed part, which is why measurement and inspection are important. The manufacturer’s published maintenance schedule calls for brake fluid to be flushed or replaced every 45,000 miles.

The 2022 Honda Pilot has a 3.5-liter V6 producing 280 horsepower and 262 lb-ft of torque, with towing capacity ranging from 3,500 to 5,000 pounds across trims. Bring your 2022 Honda Pilot to Larry H. Miller Honda Murray in Murray for an OEM-spec brake service — schedule service.

Brake systems wear as a group. Replacing one component while overlooking related pad, rotor, fluid, caliper, hose, or hardware concerns can shorten the useful life of the new part. The inspection gives drivers a clearer basis for deciding what should be addressed now and what can be monitored.

To arrange service, use the schedule service form, review current service specials, or call Larry H. Miller Honda Murray at 385-425-4756. The service center is located at 5808 S. State Street in Murray, Utah.