2022 Honda Pilot Check Engine Light in Murray, UT

It means the engine computer stored an OBD-II trouble code identifying a specific system fault.

The light can indicate anything from a loose gas cap to sensor failures or misfires. Your 2022 Honda Pilot logs freeze-frame data when the fault occurs, which helps our Honda-certified team in Murray, UT reproduce and confirm the issue. We retrieve codes and live data using Honda’s factory diagnostic tools, then verify the root cause before recommending repairs.

• Common triggers: EVAP leaks, O2 sensor faults, misfires, or catalyst efficiency
• Location: 5808 South State Street, Murray, Utah 84107
• Schedule online: schedule service

Frequent causes include EVAP leaks (often P0456), oxygen sensor faults (P0135/P0155), misfires (P0300–P0306), MAF issues (P0101), and catalyst efficiency (P0420).

Your 2022 Honda Pilot uses a 3.5L V6 with sophisticated emissions controls; minor leaks or sensor drift can trip the light. In Murray’s seasonal temperature swings, EVAP small leaks are common after refueling. Our team confirms the actual fault with smoke testing, live-data review, and isolation tests so you fix the cause—not just the code.

• Honda factory scan data to pinpoint faults
• Smoke test for EVAP and vacuum leaks
• Written estimate before any repair

If the light is steady, drive cautiously to service; if it’s flashing, stop driving because a severe misfire can damage the catalytic converter.

A steady light on a 2022 Honda Pilot often points to a non-urgent emissions or sensor issue, but performance and fuel economy may suffer. A flashing light signals active misfire and potential converter damage, which can become expensive quickly. If flashing, safely pull over and call us; otherwise, schedule the soonest available diagnostic visit.

• Flashing = misfire risk; avoid highway speeds and heavy loads
• Call: (801) 719-5451
• Same-day diagnostics: schedule appointment

A parts store reads basic codes; our Honda-certified technicians use factory scan tools to access proprietary data, run pinpoint tests, and confirm the exact cause.

OBD-II codes have multiple possible causes, so swapping parts based on a generic read can waste money. In Murray, our team reviews freeze-frame data, performs guided diagnostics, and provides a written estimate before any repair. You’ll also get genuine OEM parts and a complimentary multi-point inspection for your 2022 Honda Pilot.

• Honda factory diagnostics and service information
• Isolation testing to verify the root cause
• OEM parts for fit, longevity, and resale value

No—clearing codes resets readiness monitors, and Utah’s OBD-based inspection will fail until monitors complete a proper drive cycle.

Simply erasing the light on a 2022 Honda Pilot doesn’t fix the underlying issue and often delays an inevitable retest. Our Murray service team diagnoses and repairs the root cause so monitors can set naturally. After repair, we advise on the correct drive cycle to complete monitors before your test.

• OBD monitors must be “Ready” to pass
• Fix the fault first to avoid repeat tests
• Get help: schedule service

Use the online scheduler 24/7 or call (801) 719-5451; same-day slots are often available Monday–Friday 7:00 AM–6:00 PM and Saturday 8:00 AM–5:00 PM.

Choose “Check Engine Light” for your 2022 Honda Pilot and note any symptoms (flashing light, rough idle, fuel smell). Our team will confirm your appointment and review any special concerns on arrival. If you need a lift while we work, ask about our complimentary local shuttle in Murray.

• Book now: schedule appointment
• Address: 5808 South State Street, Murray, UT
• Check current service specials

Your visit begins with an initial OBD-II scan on your 2022 Honda Pilot to capture stored and pending codes plus freeze-frame data. A Honda-certified technician then performs a visual inspection for loose connections, vacuum/EVAP leaks, and damaged wiring. Next, we run isolation tests matched to the fault: smoke testing for EVAP codes, sensor circuit checks, coil/injector balance for misfires, and live-data road testing as needed. Youll receive a clear, written estimate explaining findings and options before any repair is started. Every visit also includes a complimentary multi-point inspection to note safety or maintenance needs. Ready to proceed? Call (801) 719-5451 or schedule service online.

Our Murray, Utah location supports accurate diagnostics for the 2022 Honda Pilot using Honda factory scan tools and service information. Compared with generic code readers, we can access proprietary modules, bi-directional controls, and enhanced data to confirm the root cause. Seasonal cold starts and temperature swings can surface EVAP small-leak codes or intermittent sensor faults; we review freeze-frame data to test under matching conditions. Enjoy a remodeled lounge with Wi-Fi and refreshments, plus complimentary local shuttle service while we work. For directions, head to 5808 South State Street in Murray, or call (801) 719-5451 to speak with our service team. You can also book anytime using our online scheduler or check current service specials.

On the 2022 Honda Pilot, typical codes include P0456 (EVAP small leak), P0420 (catalyst efficiency), P0300–P0306 (random/cylinder-specific misfire), P0135/P0155 (O2 heater), and P0101 (MAF range/performance). EVAP leaks often trace to a loose cap or brittle hoses; ignoring them can lower fuel economy and trigger inspection failures. Catalyst and misfire codes demand quick attentionmisfires can overheat and ruin the catalytic converters, turning a small fix into a major expense. Sensor and airflow codes may reduce power and raise fuel use if left unresolved. Bring your 2022 Honda Pilot to Larry H. Miller Honda Murray in Murray for an accurate diagnosis schedule service.