2023 Honda CR-V Brake Rotors

A technician measures both conditions before recommending resurfacing or replacement. Rotors below the minimum thickness cannot safely shed heat as designed, and many modern rotors fall below the resurfacing threshold by the first wear cycle.

• Thickness is measured against the manufacturer’s minimum.
• Runout helps identify a warped or uneven rotor.
• Rotor condition is reviewed with pad and caliper condition.

Brake pads and rotors do not automatically require replacement at the same time. Larry H. Miller Honda Murray measures the rotor and inspects the pads, calipers, hardware, and brake fluid before recommending the appropriate repair for your CR-V.

• Rotors below minimum thickness require replacement.
• Warped rotors can cause pedal pulsation or steering-wheel shudder.
• Scoring and uneven surfaces are checked during brake service.

These symptoms can develop when a rotor cannot dissipate heat evenly or its braking surface becomes worn. A professional inspection in Murray can measure rotor thickness and runout instead of relying only on symptoms.

• Pedal pulsation or vibration during braking.
• Scoring, grooves, or a lip around the rotor edge.
• Uneven braking from one stop to the next.

Sustained downhill braking on canyon descents can heat rotors, while towing increases thermal load. Stop-and-go driving can also accelerate brake wear. Measuring runout and thickness identifies whether replacement is appropriate.

• Canyon descents can create sustained braking heat.
• Towing increases the thermal load on braking components.
• Runout measurement helps confirm an uneven rotor condition.

Aftermarket rotors vary by quality tier, design, and materials. Genuine Honda parts help maintain the intended fit and braking characteristics for the 2023 Honda CR-V, while the technician also checks related brake components during installation.

• OEM parts are built for factory fit and function.
• Aftermarket quality can vary between manufacturers.
• Pad condition and hardware are inspected with rotor service.

The inspection also covers pads, calipers, hardware, and brake fluid condition. This approach connects the driver’s symptoms with measurable brake-system conditions before work is recommended at Larry H. Miller Honda Murray.

• Rotor thickness and runout are measured.
• Brake pads, calipers, and hardware are inspected.
• Brake fluid condition is reviewed.

The service team handles rotor measurements, brake inspections, and replacement recommendations for new and pre-owned vehicles. The dealership’s service center is open Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM.

• Address: 5808 S. State Street, Murray, UT 84107.
• Online scheduling is available.
• Sunday service hours are closed.

The technician also evaluates the pads, calipers, hardware, and brake fluid condition. If a rotor is below specification or warped, replacement is recommended; otherwise, the inspection helps determine the appropriate next step.

• Thickness is checked against the minimum specification.
• Runout is measured for uneven rotor movement.
• Related brake components are inspected for wear.

The inspection also considers visible scoring, grooves, a lip at the rotor edge, blue heat marks, and uneven braking from one stop to the next. Pad condition, calipers, hardware, and brake fluid are reviewed at the same time so the recommendation addresses the complete brake system. Rotor resurfacing or replacement depends on the measured condition and the manufacturer’s minimum specification.

For the 2023 Honda CR-V, brake rotor concerns should be evaluated promptly when vibration or pulsation appears. Bring your 2023 Honda CR-V to Larry H. Miller Honda Murray in Murray for OEM-spec rotor service — schedule service.

Local driving conditions can affect brake wear. Sustained downhill braking on canyon descents heats rotors, towing increases thermal load, and stop-and-go driving can accelerate wear. The dealership offers online scheduling, same-day service availability, and a free local shuttle service. The remodeled waiting area includes Wi-Fi, device charging stations, television, and complimentary food and beverages.

Service hours are Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM. Visit 5808 S. State Street in Murray or call the service department at (801) 719-5451 to arrange an inspection.

After installation, the braking system is checked for proper operation. The service process includes a bedding-in procedure to help establish an even contact surface between the pads and rotors, followed by a road test when appropriate. Genuine Honda parts are used to support factory fit and braking characteristics. The service team communicates findings before recommending additional work.

To keep your 2023 Honda CR-V running at peak performance, use the online service scheduling tool or call (801) 719-5451. You can also review service specials before booking.