2024 Honda Odyssey Brake Specials in Murray, UT

These symptoms can involve brake pads, rotors, calipers, hoses, hardware, or brake fluid. A brake inspection at Larry H. Miller Honda Murray in Murray checks the system together rather than evaluating pads alone.

• Squealing or scraping during braking
• Pulsing or a soft brake pedal
• Dark-looking brake fluid or a warning light

Brakes wear as a system, so examining each related component helps identify what the Odyssey actually needs. The inspection supports a clear recommendation before parts are replaced. Current service specials are applied to qualifying work.

• Pad-material measurement at all four corners
• Rotor-thickness and runout measurement
• Caliper, hose, hardware, and brake-fluid inspection

If the rotors are within specification, replacing pads alone may be appropriate. If thickness, runout, or surface condition requires attention, pads and rotors may be addressed together. Larry H. Miller Honda Murray measures the rotors before recommending the repair.

• Rotor thickness is measured before replacement advice
• Runout is checked for vibration concerns
• The recommendation is based on actual brake-system condition

Brake concerns can affect stopping control and may allow damage to spread from pads to rotors or other components. Contact Larry H. Miller Honda Murray and use the schedule appointment link for an inspection in Murray.

• Stop driving if braking performance changes significantly
• Grinding may indicate severe pad or rotor contact
• A warning light should be evaluated promptly

The choice depends on your priorities, budget, and preferred parts. Larry H. Miller Honda Murray can provide OEM-spec pads, rotor measurements, brake-fluid checks, and system-specific service context for the 2024 Honda Odyssey. Ask for up-front pricing before authorizing work.

• OEM-spec pads designed for factory braking feel
• Brake-system inspection beyond pad replacement
• Up-front pricing before recommended repairs

The service center works on new and pre-owned vehicles and offers online scheduling for routine maintenance and diagnostics. Customers can also call the service department at (801) 719-5451.

• Address: 5808 S. State Street, Murray, UT 84107
• Schedule service online
• Service phone: (801) 719-5451

Its front-wheel-drive layout pairs with a 10-speed transmission and regular unleaded fuel. The Odyssey also delivers 19 city MPG, 28 highway MPG, and a maximum towing capacity of 3,500 pounds.

• 3.5-liter V6 engine
• Front-wheel drive
• 10-speed transmission

The minivan measures 205.2 inches long, 78.5 inches wide, and 69.6 inches high, with a 118.1-inch wheelbase. These dimensions support family hauling, luggage capacity, and everyday versatility.

• 32.8 cubic feet behind the rear seats
• 3,500-pound maximum towing capacity
• 19.5-gallon fuel capacity

Brake noises, pedal pulsation, soft pedal feel, a warning light, dark fluid, or longer stopping distance deserve prompt evaluation. Pads and rotors should not be replaced together automatically; the correct recommendation depends on rotor thickness, runout, and condition. The current brake special applies to the complete assessment and to the work the vehicle actually needs. The Odyssey’s 3.5-liter V6, front-wheel-drive layout, and 3,500-pound towing capacity make consistent brake performance important during daily driving and loaded trips.

Bring your 2024 Honda Odyssey to Larry H. Miller Honda Murray in Murray for an OEM-spec brake service — schedule service.

The service center supports drivers in Murray and surrounding Salt Lake Valley communities with online scheduling, same-day service availability, and a free local shuttle service. Canyon descents can heat brakes, stop-and-go traffic accelerates pad wear, and towing changes brake-system duty cycles. These conditions make a complete inspection useful for an Odyssey used for commuting, family travel, or hauling.

For directions or brake assistance, visit Larry H. Miller Honda Murray at 5808 S. State Street, Murray, UT 84107, or call (801) 719-5451. You can also schedule an appointment online.

When repair work is recommended, the process can include OEM-spec pads, hardware attention, rotor service or replacement when measurements require it, and a brake-fluid check. Caliper slides are cleaned and lubricated as appropriate, followed by a road test to evaluate pedal feel, braking response, and noise. Brake wear is a system issue, so replacing one component without checking the others can shorten the life of new parts.

Book through the service scheduler or review current service specials. For a direct appointment request, call (801) 719-5451.