2024 Honda Passport Brake Specials in Murray, UT

Visit Larry H. Miller Honda Murray at 5808 South State Street, Murray, UT 84107, or call (801) 719-5451.

Our service center handles brake inspections, pad and rotor work, and road tests for the 2024 Honda Passport using genuine Honda parts. Enjoy same-day availability, complimentary multi-point inspections, and a comfortable lounge with Wi‑Fi and refreshments. You can also book in minutes using our secure online scheduler.

• Address: 5808 South State Street, Murray, UT 84107
• Phone: (801) 719-5451
• Schedule service online anytime

Watch for squealing wear indicators, grinding, a brake warning light, steering-wheel or pedal pulsation, and longer stopping distances.

These symptoms indicate pads may be worn or rotors may be uneven or below spec on your Passport. Murray’s urban traffic can increase heat cycles that reveal pulsation or noise sooner. If you notice any of these signs, schedule a prompt inspection to protect stopping performance and rotor condition.

• Squeal or grind when braking
• Brake warning icon on the dash
• Vibration or pulsation in pedal/steering

Replace both only if rotors are at or below minimum thickness or have heat spots/warp; if rotors measure within spec, pads alone may be sufficient.

Our technicians measure rotor thickness and runout against Honda specifications, then advise whether resurfacing or replacement is appropriate. Replacing pads on healthy rotors preserves feel and saves cost; worn rotors paired with new pads can cause noise or vibration. You’ll receive measurements and clear options before work begins.

• Rotor thickness measured vs. Honda minimum
• Runout and surface condition checked
• Up-front recommendations with options

No—if pads are near the wear indicator or a brake warning light is on, park the vehicle and schedule service immediately.

Driving on worn pads risks rotor damage and longer stopping distances, especially in stop‑and‑go Murray traffic. Early inspection can prevent grinding and reduce total repair cost. If you suspect wear, book an appointment online or call for guidance from a factory-trained advisor.

• Stop if grinding or a warning light appears
• Schedule a same-day inspection
• Protect rotors to avoid larger repairs

A typical visit includes pad measurement, rotor thickness/runout checks, hardware service, brake fluid check, caliper slide cleaning/lubrication, and a road test.

Our team documents pad depth and rotor specs against Honda guidelines to confirm whether pads, rotors, or both are needed. We use Honda-spec components to maintain proper feel and quiet operation. Youll receive clear results and options before any work proceeds.

• Detailed inspection with measurements
• Hardware service and fluid check
• Post-repair road test for pedal feel

Dealer service installs OEM Honda pads/rotors to factory NVH standards and applies Honda torque specs; independents may use varying aftermarket parts.

At Larry H. Miller Honda Murray, factory-trained technicians use Honda-approved procedures and diagnostic tools. Youll get documented measurements, clear estimates, and a road test. While independent shops may offer different parts options, many owners prefer OEM components for consistent pedal feel and quiet stops.

• OEM Honda pads/rotors and hardware
• Factory torque/torque-sequence procedures
• Measurement-based recommendations

Service hours are MondayFriday 7:00 AM6:00 PM, Saturday 8:00 AM5:00 PM, and Sunday closed.

These extended hours make it easy to plan a brake inspection or repair around your day. Same-day availability is often possible, and a local shuttle can help keep you on schedule. Book online any time or call for current openings.

• Weekdays: 7:00 AM6:00 PM
• Saturday: 8:00 AM5:00 PM
• Schedule service or call (801) 719-5451

Schedule online at the Larry H. Miller Honda Online Scheduling Tool or call (801) 719-5451.

Our digital scheduler lets you choose a time, describe symptoms, and request shuttle service if needed. Youll receive confirmation and can check service specials before your visit. If you prefer, a service advisor can book for you by phone.

• Schedule service in minutes
• Phone scheduling: (801) 719-5451
• Review current service specials

Brake performance on a 2024 Honda Passport depends on correct pad friction, rotor condition, and precise torque procedures. Our Murray service team inspects pad thickness and rotor runout against Honda standards, then recommends the right pathpads only, rotor refinishing, or pad-and-rotor replacement. Genuine Honda components help maintain quiet operation and consistent pedal feel. Same-day availability, a modern lounge with Wi‑Fi, and a complimentary multi-point inspection make service predictable and efficient. Find us at 5808 South State Street in Murray, Utah. For directions, questions, or to lock in a time, schedule service online or call (801) 719-5451.

Each Passport brake visit follows a consistent, measurement-first process. We perform a visual inspection, measure pad thickness, and record rotor thickness and runout. Hardware is inspected and serviced, caliper slide pins are cleaned and lubricated, and we check brake fluid level and condition. If replacement is needed, we install Honda-spec pads/rotors and apply factory torque specs to ensure proper bed-in and quiet operation. A road test verifies pedal feel, ABS operation, and noise levels. Youll receive a clear estimate and results before work proceeds. Have a question or ready to book? Schedule service or call (801) 719-5451.

The 2024 Honda Passport features a robust SUV braking setup designed for daily commuting and weekend travel. The system uses front and rear disc brakes with an all-wheel-drive platform that benefits from balanced front/rear brake bias. For replacements, we recommend genuine Honda pads and rotors engineered to the models noise, vibration, and harshness targets. During service, our technicians confirm rotor thickness and lateral runout against Honda specifications and verify even pad wear. We also review any applicable Honda service guidance and apply updated procedures as needed. Bring your 2024 Honda Passport to Larry H. Miller Honda Murray in Murray for an OEM-spec brake serviceschedule service.