2024 Honda Ridgeline Coolant in Murray, UT

A puddle under the front of the vehicle or a reservoir level that keeps dropping can also point to a cooling-system leak. The system is under pressure and hot after running, so checking it should be done cold. A service visit helps determine whether the condition calls for a drain and refill or leak repair.

• Temperature gauge running higher than usual
• Sweet smell or a puddle under the front
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. Pressure testing helps identify leaks that may not be visible during a basic inspection. The results help distinguish coolant that needs service from a system concern requiring repair.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

There is no need to judge the timing by appearance alone because coolant additives can deplete while the fluid still looks usable. Coolant condition can also be tested during a service visit between scheduled points. That testing helps identify whether the fluid needs attention or whether a separate leak or component concern is present.

• Follow the manufacturer's maintenance schedule
• Test coolant condition during a service visit
• Inspect for leaks when the level drops

Coolants are not interchangeable, so selecting fluid by convenience can reduce the protection intended for the cooling system. Colour is not a reliable guide to what is in the bottle. A Honda technician can use the vehicle requirements and service inspection to select the proper coolant for the refill.

• Use the manufacturer's specified coolant type
• Do not assume different coolants are interchangeable
• Do not use colour alone to identify coolant

If the level keeps dropping, treat that as a possible leak rather than normal consumption and book an inspection. The cooling system is under pressure and hot after running, so checking it should be done cold. A pressure test can help identify whether the system is losing coolant.

• Adding coolant restores level only
• A recurring drop can indicate a leak
• Have the system checked cold by a technician

The dealership is located at 5808 South State Street in Murray, Utah. Booking lets the service team check coolant condition and pressure-test the system, helping separate due maintenance from a leak that needs repair. Service hours include weekday and Saturday availability.

• Use the online service scheduler
• Call 385-425-4756
• Visit 5808 South State Street, Murray, UT 84107