2025 Honda Cr-V Air Filter in Murray, UT

The 2025 Honda CR-V engine air filter sits inside the airbox in the engine bay, ahead of the intake tube.

This sealed plastic housing is typically on one side of the bay and opens with a few clips or screws. Keeping this filter clean helps the naturally aspirated engine breathe properly on Utah commutes and canyon drives. If you prefer a pro install, our Murray team can inspect the housing and sealing surfaces during replacement.

• Airbox location: engine bay, upstream of the intake tube
• Opens via retaining clips or screws; no special tools typically needed
• Schedule service for inspection and OEM-spec fit

The engine air filter protects the CR-V’s intake for combustion, while the cabin air filter cleans HVAC air for passengers.

Both filters matter but serve different systems. The engine filter prevents dust from entering the intake tract and throttle body; the cabin filter screens pollen, dust, and debris before air reaches the vents. In Northern Utah, varying road and seasonal conditions can load either filter faster. We install Genuine Honda filters to maintain fit and filtration.

• Engine filter: intake protection and optimal airflow
• Cabin filter: cleaner air through the HVAC system
• OEM filters help ensure sealing, flow, and filtration

Typical signs include reduced power and mpg (engine filter) and weak airflow or musty odors (cabin filter).

If the engine filter is restricted, you may notice sluggish acceleration, rougher idle, or darker filter media. A loaded cabin filter often shows diminished HVAC output, stale smells, or increased fan noise. Because CR-Vs see mixed city, highway, and mountain use, a quick check during oil service can catch issues early in Murray and the greater Salt Lake area.

• Engine clues: hesitation, lower fuel economy, darker/dirty media
• Cabin clues: weak vents, odors, louder fan at higher speeds
• Schedule an inspection or view service specials

Yes—engine air filter replacement is typically DIY-friendly; many owners use basic tools to open the airbox.

The cabin filter often lives behind the glove box and may require trim release and careful orientation of the pleats. Dealer service adds a housing seal check, intake/MAF visual inspection, and the correct Genuine Honda filter. If you’d like our team to handle both, book a visit to Larry H. Miller Honda Murray.

• DIY: engine filter commonly accessed via clips/screws
• Cabin filter: glove-box access; watch airflow arrows and fit
• Dealer install: OEM filter spec, fitment check, proper disposal

Yes—Larry H. Miller Honda Murray installs Genuine Honda filters that meet OEM specifications.

Our parts inventory focuses on Honda-engineered filtration for proper fit, sealing, and airflow on the 2025 Honda CR-V. Using OEM filters supports performance and helps avoid intake leaks or HVAC bypass. If you’re comparing options, we’re happy to show the construction differences and help you choose what’s right for your CR-V in Murray.

• Genuine Honda engine and cabin filters available
• Designed for the CR-V’s airbox and HVAC carrier
• Schedule service or check service specials

Air filter replacements are completed during a standard service visit at our Murray facility.

Most 2025 Honda CR-V owners pair filter service with an oil change or multi-point inspection, so it fits easily into one appointment. Our advisors can coordinate timing when you book online and confirm if you’re doing engine, cabin, or both filters. Use our online scheduler to pick a slot that matches your day.

• One-visit convenience at 5808 South State Street, Murray, UT 84107
• Combine with other maintenance for efficiency
• Schedule your appointment now

Follow the official Honda maintenance guidance in your owner’s manual for the 2025 Honda CR-V.

Honda’s schedule provides the definitive timing based on vehicle design and operating conditions. Driving across the Wasatch Front can expose your intake to dust and debris, so visual checks between services are smart. Our team in Murray can inspect the engine filter during routine visits and advise if replacement is due.

• Reference the 2025 CR-V owner’s manual for service timing
• Inspect more often if you drive on dusty or unpaved roads
• Schedule an engine filter check

Use the 2025 Honda CR-V owner’s manual to determine the official cabin filter replacement interval.

The correct interval depends on usage and environment; city commuting, mountain driving, and seasonal debris can load the media faster. If you notice weaker airflow or lingering odors, it’s time to check the cabin filter. We can inspect and replace it using a Genuine Honda element sized for the CR-V’s HVAC carrier.

• Manual-based guidance ensures you follow Honda’s standard
• Check sooner if airflow drops or odors appear
• Book a cabin filter service today

Your appointment begins with a brief consultation and VIN verification so we source the correct CR-V filters. A technician then opens the engine airbox, inspects the existing media, and checks the airbox gasket and clips. If replacement is approved, the old element is removed, the housing is wiped for debris, and a Genuine Honda filter is installed. For the cabin, the glove box carrier is accessed, the filter door is released, airflow direction is verified, and a new OEM cabin filter is fitted. We also perform a visual inspection of the intake tract and MAF area and verify idle quality. Old filters are properly disposed of. Ready when you are—use our schedule service tool to reserve a time that fits your day.

The 2025 Honda CR-V uses a dedicated panel-style engine air filter designed to fit the factory airbox and a cabin microfilter designed for the HVAC carrier behind the glove box. Genuine Honda filters deliver the sealing and surface area the CR-V’s naturally aspirated engine and ventilation system expect. Consult your owner’s manual for the OEM-recommended replacement timing and any maintenance indicators relevant to your trim. If your driving includes frequent trips across the Wasatch Front or dusty construction corridors, visual checks between scheduled services are a smart safeguard. Bring your 2025 Honda CR-V to Larry H. Miller Honda Murray in Murray for OEM-spec filter service — schedule service.

Our Service Center supports CR-V drivers throughout the greater Salt Lake City area, including Millcreek, Taylorsville, Sandy, and Holladay. Local driving—urban stop‑and‑go, freeway commutes, and mountain passes—can load intake and cabin filters more quickly, so periodic inspections help sustain performance, HVAC airflow, and air quality. Factory-certified, OEM-trained mechanics handle your 2025 Honda CR-V with Genuine Honda parts and model‑specific procedures. You can book online, then head to our convenient location at 5808 South State Street, Murray, UT 84107. If you’re comparing timing with other maintenance, our advisors can bundle services in a single visit. Have questions before you come in? Use our online scheduler or drop by for quick guidance and directions.