2025 Honda Cr-V Oil Change in Murray, UT

${{vehicle.real_oil_change_price_range_usd.min}}–${{vehicle.real_oil_change_price_range_usd.max}} at Larry H. Miller Honda Murray in Murray.

This range reflects OEM-spec oil and a genuine Honda filter, performed by OEM-trained technicians with proper disposal and a multi-point inspection. You’ll get an up-front quote before work begins and options to apply current offers. Reserve a time online and arrive a few minutes early to review your service write-up.

• Includes OEM-spec oil: {{vehicle.oem_oil_spec}}
• Typical fill quantity: {{vehicle.oil_capacity_quarts}} quarts (with filter)
• Book online: schedule service and check service specials

{{service.duration_minutes}} minutes for most Larry H. Miller Honda Murray appointments.

Plan for about a standard service bay slot, with additional time if you add tire rotation or inspections. Our advisors confirm timing at write-up, and you can wait in our lounge or drop the vehicle and receive updates. Scheduling ahead helps us stage parts and minimize your visit.

• Estimated shop time: {{service.duration_minutes}} minutes
• Add-ons (rotations/inspections) can extend visit time
• Reserve your spot: schedule service

Every {{vehicle.oem_oil_interval_miles}} miles under normal driving.

Honda’s maintenance schedule is the baseline; severe-duty use across {{rooftop.climate_context}} may require shorter intervals. Our team documents each service to help protect your vehicle’s long-term reliability and resale value. Check your maintenance minder and owner’s manual for specifics between visits.

• Normal interval: {{vehicle.oem_oil_interval_miles}} miles
• Severe use (e.g., extreme temps, dust, frequent short trips) may shorten intervals
• Book or ask an advisor: schedule service

{{vehicle.oem_oil_spec}} per Honda specifications.

We fill to the factory spec for the 2025 Honda CR-V to maintain proper viscosity, shear stability, and protection at Utah elevations and temperatures. Using the specified oil helps ensure smooth cold starts, stable film strength under load, and compliance with Honda’s maintenance schedule.

• Factory specification: {{vehicle.oem_oil_spec}}
• Installed with a genuine Honda oil filter
• Documented on your service record at Larry H. Miller Honda Murray

{{vehicle.oil_capacity_quarts}} quarts with a filter change.

Our technicians measure the drain and fill precisely, then verify the level after a short run cycle. Correct capacity and the right filter help maintain oil pressure and prevent aeration. You’ll leave with a documented receipt showing the oil spec and quantity used.

• Capacity includes a new filter: {{vehicle.oil_capacity_quarts}} quarts
• Level checked after engine warm-up
• Disposal handled to EPA standards

Larry H. Miller Honda Murray uses OEM-spec oil and a genuine Honda filter, plus a multi-point inspection and fluid top-offs.

Quick-lube shops can be convenient and sometimes lower cost for conventional oil, but your Honda benefits from factory-spec fluids, trained technicians, and service records that support long-term reliability and potential warranty needs. You decide what matters most—speed, price, or OEM documentation.

• OEM-spec oil and Honda filter installed
• Multi-point inspection and service record included
• Compare offers: service specials

{{rooftop.warranty_terms.oil_change}} applies; missed or undocumented oil services can lead to denied coverage.

Follow the factory schedule and keep receipts to demonstrate proper maintenance. Warranty work generally requires a certified facility, and our OEM-trained team documents each visit to your service history. If you’re unsure about timing, we can review your maintenance minder and prior records.

• Follow the schedule: {{vehicle.oem_oil_interval_miles}} miles (normal conditions)
• Keep service receipts and records
• Certified facility support for warranty-related concerns

{{vehicle.oem_oil_spec}} is the Honda-specified oil for this engine.

Conventional oil is mineral-based, a synthetic blend mixes mineral with synthetic for improved stability, and full synthetic is engineered for superior oxidation resistance and cold-flow performance. Using the oil that matches Honda’s specification helps maintain protection in Utah’s varied driving and elevation changes.

• Conventional: mineral base, basic protection
• Synthetic blend: better stability than conventional
• Full synthetic: optimized heat/cold performance per spec

For your 2025 Honda CR-V, our oil change service follows Honda’s requirements from write-up to quality check. We confirm your concerns, verify mileage and maintenance minder, and install OEM-spec oil ({{vehicle.oem_oil_spec}}) with a genuine Honda filter. The old oil is drained to spec, a new crush washer is fitted where applicable, and the filter is replaced and torqued correctly. After refill to the proper level ({{vehicle.oil_capacity_quarts}} quarts with filter), a multi-point inspection is performed with fluid top-offs and tire pressure check. Your invoice documents the oil spec, quantity, and inspection notes. Warranty terms for oil service are defined by {{rooftop.warranty_terms.oil_change}}; retaining records helps protect coverage. Ready to plan your visit? Use our online schedule service tool and review current service specials.

Honda specifies {{vehicle.oem_oil_spec}} for the 2025 Honda CR-V to deliver proper viscosity control, detergent balance, and thermal stability. Typical capacity is {{vehicle.oil_capacity_quarts}} quarts with a filter change; we verify the level after a brief run cycle and update your service record. Under normal conditions, the recommended oil change interval is {{vehicle.oem_oil_interval_miles}} miles. In severe-duty driving across {{rooftop.climate_context}} (frequent short trips, heavy traffic, dust, or temperature extremes), your advisor may recommend a shorter interval to preserve engine health. If any engine-oil-related bulletins apply, we’ll review them during your visit and advise next steps. Bring your 2025 Honda CR-V to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

We proudly serve drivers from the greater Salt Lake City area, including Millcreek, Taylorsville, Sandy, and Holladay. Utah’s mix of mountain passes, urban stop-and-go, and seasonal temperatures can qualify as severe duty, so using the correct Honda-spec oil and keeping consistent intervals is key for your 2025 Honda CR-V. Our OEM-trained technicians perform oil and filter service, complete a multi-point inspection, and document everything for your records. Find us at 5808 South State Street, Murray, UT 84107. Have a tight schedule? You can schedule an appointment online 24/7 and review current service specials before you arrive. We’ll help your crossover stay ready for daily commutes and weekend getaways along the Wasatch Front.