2025 Honda Odyssey Brake Specials in Murray, UT

These symptoms can indicate wear involving the pads, rotors, calipers, hardware or fluid. Booking a brake inspection at Larry H. Miller Honda Murray helps assess the entire system rather than focusing on one component.

• Squealing, scraping or grinding during braking
• Pulsation or a soft brake pedal
• A brake warning light or dark brake fluid

Brakes wear as a system, so the inspection considers the related components together. The team can apply current service specials to the work the Odyssey actually needs.

• Pad-material measurement on all four corners
• Rotor-thickness and runout measurement
• Inspection of calipers, hoses, hardware and fluid condition

If the rotors measure within specification, replacing pads alone may be appropriate. If thickness or runout is outside specification, pads and rotors may need to be replaced together. A measurement-based inspection supports the recommendation.

• Rotor thickness is measured during the inspection
• Rotor runout is checked for braking vibration
• Pad and rotor work is recommended according to condition

Brake fluid condition is also checked during the brake inspection. Regular fluid service supports the hydraulic side of the braking system and can be considered alongside pad, rotor and hardware measurements.

• Brake fluid condition is inspected
• The published interval is every 45,000 miles
• Fluid service is evaluated with the rest of the brake system

The service team works with both new and pre-owned vehicles and uses factory-trained Honda technicians and genuine Honda parts. You can schedule service online before visiting the dealership.

• Service location: 5808 S. State Street, Murray, UT 84107
• Factory-trained Honda technicians
• Online appointment scheduling is available

Booking the full brake inspection allows the team to assess pads, rotors, calipers, hoses, hardware and fluid together. Any applicable offer can then be applied to the work the vehicle needs.

• Review current service specials
• Measure pad material on all four corners
• Check rotors, hardware and fluid condition

Replacing one component while overlooking another can shorten the life of a new part. A combined inspection checks the friction material, rotor measurements, hydraulic fluid and supporting hardware.

• Brake pads are measured at all four corners
• Rotors are checked for thickness and runout
• Calipers, hoses and hardware are inspected

The dealership is located at 5808 S. State Street in Murray, Utah. Online booking connects your request with the service department so the brake system can be assessed and applicable specials reviewed.

• Schedule service online
• Visit the Murray service center
• Review service specials

A complete inspection also includes the calipers, hoses, hardware and brake fluid condition. These checks help identify wear that may not be visible from the outside. Drivers should pay attention to squealing, scraping or grinding, pedal pulsation, a soft pedal, a brake warning light or dark fluid. The manufacturer’s published maintenance schedule calls for brake-fluid replacement every 45,000 miles.

Bring your 2025 Honda Odyssey to Larry H. Miller Honda Murray in Murray for an OEM-spec brake service — schedule service.

This process matters because pads, rotors and fluid can wear together. If a rotor remains within specification, the inspection helps inform whether pad replacement is appropriate. If rotor measurements or other component conditions require additional work, the findings provide a clear basis for the recommendation.

Larry H. Miller Honda Murray uses factory-trained Honda technicians and genuine Honda parts. The service center is located at 5808 S. State Street in Murray, Utah. Schedule service online or call 385-425-4756.

Drivers can use the dealership’s modern waiting area with Wi-Fi, device charging stations, television, and complimentary food and beverages. Online scheduling and a free local shuttle service are also available to help make a service visit easier.

Service hours are Monday through Friday from 7:00 AM to 6:00 PM and Saturday from 8:00 AM to 5:00 PM. Sunday is closed. To arrange brake service, schedule an appointment online or call 385-425-4756.