2026 Honda Passport Oil Change in Murray, UT

At Larry H. Miller Honda Murray, a 2026 Honda Passport oil change costs ${{vehicle.real_oil_change_price_range_usd.min}}–${{vehicle.real_oil_change_price_range_usd.max}} with up-front pricing.

This range reflects OEM-spec oil and a Honda-quality filter for the 3.5L V6, plus a multi-point inspection suited to Wasatch Front driving. You’ll also get fluid top-offs and proper recycling/disposal. Check our current offers and book a time that fits your day.

• Includes OEM-spec oil and Honda-quality filter
• Multi-point inspection and fluid top-offs included
• See service specials: service specials and schedule service

{{service.duration_minutes}} minutes is the typical in-bay time at Larry H. Miller Honda Murray.

Plan a brief check-in and check-out window, or relax while our OEM-trained technicians complete the service. We use Honda procedures designed for accurate fill, proper drain-plug torque, and Maintenance Minder reset. Reserve your slot online to minimize wait time.

• Typical appointment: about {{service.duration_minutes}} minutes in-bay
• Maintenance Minder reset and inspection included
• Book ahead: schedule appointment

Change the oil every {{vehicle.oem_oil_interval_miles}} miles under normal driving, and sooner for severe Utah conditions.

Mountain driving, frequent short trips in cold weather, dust, or towing can shorten intervals. Follow the Honda Maintenance Minder and keep records to protect warranty coverage. If your routine includes canyon commutes or weekend towing, ask our advisors to tailor a plan.

• Follow Maintenance Minder and documented intervals
• Severe use: cold starts, dust, stop-and-go, or towing
• Questions? Schedule service for a quick check

{{vehicle.oem_oil_spec}} is the Honda OEM oil specification for this model.

We install oil that meets this spec for the 3.5L V6 (engine code 6VNAG3.5) to ensure proper lubrication, cold-start protection, and heat stability. Using the correct spec helps maintain performance and supports warranty compliance. Our team also uses a Honda-quality oil filter designed for the engine’s flow and filtration needs.

• Matched to the 3.5L V6 (engine code 6VNAG3.5)
• Optimized for Utah cold starts and summer heat
• See offers: service specials

{{vehicle.oil_capacity_quarts}} quarts with a new filter is the fill capacity.

Our technicians measure precisely, install a new crush washer, and verify the level after start-up and a brief warm cycle. Correct fill supports stable oil pressure for the AWD-ready V6 and helps avoid aeration or foaming under load. We also reset the Maintenance Minder and update your service records.

• Capacity: {{vehicle.oil_capacity_quarts}} quarts with filter
• Proper drain-plug torque and washer replacement
• Schedule service in Murray

Dealer service includes Honda OEM-spec oil and filter plus a multi-point inspection many quick-lube shops don’t provide.

Quick-lube can be faster or cheaper for basic service, but our OEM-trained team documents work for warranty support and uses parts matched to Honda engineering. You’ll also get proper disposal, fluid top-offs, and inspection insights tailored to local driving—snowy passes, dust, and towing up to 5,000 lbs.

• OEM-spec fluids/filters and torque-to-spec procedures
• Service records that support warranty claims
• Easy online booking: schedule now

Yes — per {{rooftop.warranty_terms.oil_change}}, missed or undocumented oil changes can affect warranty coverage.

Honda requires maintenance per the owner’s manual; keep receipts and Maintenance Minder logs. Warranty work generally requires a certified facility, and using oil that meets the OEM spec helps prevent coverage disputes. We can print a full history after each visit for your records.

• Follow the Maintenance Minder or mileage interval
• Save invoices and records for proof of compliance
• Need help? Schedule an appointment

Full synthetic resists breakdown longest and flows better in cold; Honda specifies {{vehicle.oem_oil_spec}} for this engine.

Conventional oil offers baseline protection, blends add oxidation stability, and full synthetics maximize film strength at high temps with superior low-temp pumpability. Along the Wasatch Front, cold starts, summer heat, and towing benefit from the OEM-specified oil. Using the right spec helps preserve performance and warranty eligibility.

• Use oil meeting: {{vehicle.oem_oil_spec}}
• Better cold-start protection in Murray winters
• See offers: service specials

Our process is designed around Honda’s standards for accuracy, cleanliness, and documentation. We begin with a safety check, remove the drain plug with a new crush washer, and drain the oil fully. A Honda-quality oil filter is installed to match the engine’s flow and filtration requirements, then we refill with oil that meets {{vehicle.oem_oil_spec}} to the correct {{vehicle.oil_capacity_quarts}}-quart capacity. After start-up and leak checks, we reset the Maintenance Minder and complete a multi-point inspection, including fluid top-offs and tire pressure. Your invoice and inspection report provide clear records for warranty protection under {{rooftop.warranty_terms.oil_change}}. Finish by reviewing any recommendations and current offers so you can plan ahead. Ready to book? Schedule service online in minutes.

Use engine oil that meets Honda’s OEM specification: {{vehicle.oem_oil_spec}}. The refill capacity is {{vehicle.oil_capacity_quarts}} quarts with a new filter, and we install a Honda-quality oil filter designed for the 3.5L V6 (engine code 6VNAG3.5). Under normal conditions, service the oil and filter every {{vehicle.oem_oil_interval_miles}} miles or as indicated by the Maintenance Minder. In severe service—frequent cold starts, dusty roads, towing, or heavy stop-and-go—shorter intervals help protect timing components and bearings. At each visit, we also check for active Honda campaigns and TSBs applicable to your VIN and document results on your repair order. Bring your 2026 Honda Passport to Larry H. Miller Honda Murray in Murray for an OEM-spec oil change — schedule service.

We proudly serve drivers across the greater Salt Lake City area, including Millcreek, Taylorsville, Sandy, and Holladay. Utah’s climate and terrain matter: winter cold demands oil that pumps quickly at start-up; summer heat, canyon grades, dust, and towing stress the film strength your V6 relies on. Our OEM-trained technicians tailor inspections to these conditions and keep detailed records that support warranty claims. Visit our state-of-the-art facility at 5808 South State Street, Murray, UT 84107 for precise, Honda-authorized care. View current offers on our service specials page or schedule an appointment online for a time that works for you.